How Much Does It Cost To Run A 3D Printer Per Hour?

How Much Does It Cost To Run a 3d Printer Per Hour

Most people that intend on getting a three-dimensional printer for themself will pretty much have the same questions. One of the most popular questions is “how much does it cost to run a 3d printer per hour”. Well, this will depend on many aspects such as materials or temperature, which will be put on the table shortly.  

Even though there were, are, and will be lots of attempts to realistic the making of a perpetual motion machine. Certainly, there are no machines that can work forever without consuming energy or matter. Even the planet Earth will expire someday so running a 3D printer will cost you a bit of money.

So, how much does it cost to run a 3D printer? Being said, this will depend on many aspects and conditions, and government policies will be involved too. Most of the predicted costs are voltage consumption and printing materials. And the ones that come after include such as the cleaning tool, including gloves, alcohol, or paper towels. This means we can not determine the default cost for every printer and printing project.

Because there are no default numbers to determine the cost, which means you’ll have to plan the cost by yourself. But don’t worry, this writing is all about helping you out in figuring the costs of your printer. So, shall we take a seat and talk about this?


Related: 

Why Should You Know The Cost?

How Much To Run a 3d Printer

For both people who are 3D printing for fun or starting a 3D printing business, determining the costs is a must. Knowing the costs of your products is extremely important. Just like every other business, the more it costs, the more you will want to charge your customers. You will not want to charge the customers, say, $30 when the cost is $35, none of us want that.

The cost will include the electricity consumption, the materials, your knowledge, your work, and most importantly, your time. Why time? People usually say “time is money”, like a proper business, time is the most valuable and important thing. It is not dramatic to say the costs that exclude time are just unacceptable and a waste of time.

How Much Does It Cost To Run A 3d Printer Per Hour – The Predicted Costs

How Much Electricity Does a 3d Printer Use Per Hour

For simplifying the talk, I will just take the most popular 3D printer for most people – Monoprice Voxel as an example. This way, you can easily adjust the base of the numbers on the following writings.

1. How Much Does It Cost In Electricity To Run a 3D Printer?

First of all, let’s just assume that 50 watts will take you a dollar so we can simplify the numbers. Most of the modern 3D printers will need 50 watts to proceed with a normal printing process. A normal printing process usually means a low heating point, no heated bed, and small objects. However, a normal printing process will take 2 to 4 hours or even longer be completely finished. So it will take you 400 watts for a normal object.

But if you are into a bigger project, you should consider getting a heated bed. Most of the heated beds on the market will need 120 Volt as the input to heat the bed properly. This means the total voltage cost will increase to around 500 watts per hour. But it can drop to 80 or 100 watts when the heat is stabilized.

2. How Much Does It Cost To Clean A Printer?

When you are going to print a brand new object, you will need to clean them properly. To do that, you will need tools and cleaning liquids. Most of the 3D printer users will use a straight and solid ruler or something similar, paper towels and acetones. The total costs are super low, just around $10 for acceptable tools. The cleaning process will not take much time if you know how to properly do it.

Nozzle 3d Printer

A brush that is a must to clean the nozzle properly

On the other hand, if you are too busy or just don’t want to clean the printer by yourself, you might want to take the printer to the cleaning service. They will take you somewhere around $50 to make your printer as clean as new and always ready to print.

3. The Replacements Cost

Just like being said, some parts of the three-dimensional printer will wear out or break over time. This means you will have to replace the old parts with newer ones. Especially parts that are usually exposed to heat such as the print head or the heating bed. The cost of these will pretty much depend on the manufacturer.

Replacement Parts For 3d Printers

Or you can print the replacement parts by yourself

For example, an authentic nozzle of the Monoprice Voxel will take you around $24 and the bed will take $8. The prices will vary depending on where you live, shipping fees, and the government policies.

Are you using a different device? here is a small tip. First of all, you will want to know the price of the electricity where you live. Second, you will need to know the voltage requirement of the printer. And lastly, just look at the time it takes to finish the printing process. When you have all the needed numbers, you can easily determine the cost by multiplying the numbers by order. This way, you can now know how much does it cost to run a 3D printer for an hour.

Things Will Affect On How Much Does It Cost To Run A 3D Printer Per Hour

How Much Does It Cost To Operate a 3d Printer

The things above are not all, obviously. Some things will affect the costs greatly, especially when you are getting yourself into a serious project. So here are some noticeable things that will play a big role in affecting the costs. Let’s dig into this!

1. The Materials:

As you may already know, the printers work by heating the solid material and print them layers on layers. By that, materials that need a lower heating point will consume less electricity, PLA is a good example. Just like that, materials that need a higher temperature to melt will consume more electricity, like ABS plastics or metallic materials.

2. The Building Plates:

Some material with a low heating point will quickly cool down as soon as they are out of the nozzle. Usually, the solution is using a heated building plate, and it will pretty much increase the power consumption. But the point is, you use a low heating point material at first so it will lower the power consumption. But it cools down too quickly so you need a heated bed, which will cost more power, ironically. The solution for this problem is you will need to print in a warm or hot environment.

How Much Does It Cost In Electricity To Run a 3d Printer

You will need a print bed for the best final result

3. The Nozzle:

The nozzle or print head plays a big role in power-consuming too. A smaller print head will extrude less material, offering more precision to the object. This means it’ll take a longer time to finish the printing process, and will consume more power for the heat. Meanwhile, a bigger print head will extrude more material at the same time, but with less precision. This means it will reduce the printing time and lower the power consumption as the printing process takes less time.

4. The Printer Itself:

A bigger 3D printer will need more power to work, so if you are trying to reduce the power costs, you might want to try a smaller one. Usually, a big printer will include lots of features, which will cost more power. While a small 3D printer may not have all the fancy features, it will help lower the costs. Furthermore, a small 3D printer will work just fine if you are 3D printing as a hobby.

5. The Printing Settings:

How Much Does a 3d Printer Cost To Run Uk

Is your 3D printer using too much power despite you have tried all things above? Then you should try to adjust the settings, most of the problems start with the lower layers. The thicker the lower layer, the longer it will take to print. This means it will increase the overall power cost of the whole printing process.

And also, if you are currently ironing the object, you might want to turn the ironing feature off. Ironing will increase the printing time greatly, and the overall costs as well. Try sanding them manually if you want to lower the costs, but this will pretty much take lots of your time.

6. Post Printing Process:

When the printer is finished printing the object, it is now your turn to work with the printed object. Things that many people do when getting a new object are removing it from the plate and sanding them down. These tasks can be quite boring and exhausting, but hey, you can always charge your customers for that. Many people don’t count this as a cost, but spending your time is a cost. Remember to count it, do not waste your time.

What Will Affect The Printing Time?

Just like being said, the less time it takes to print, the more electricity is saved. This means reducing the time of the printing process will more likely lower the overall costs. Yet, many things will affect the printing time, things that are noticeable for a better final result. To know how much does it cost to run a 3D printer per hour, you will have to know these.

1. The 3D Model:

Obviously, a simple model will offer a quicker printing time as the more complex model will take longer to print. If your model has some little details that can be carved manually, you should remove them and carve them when it is done for a quicker printing process.

Complex 3d Models

A complex 3D model will take longer to print

2. The Model Volume:

With the three-dimensional model, you can easily calculate its total volume, including the support parts. This total volume will help a lot in knowing how much it will cost to print. This will also include how much materials will be used, the printing time, and the electricity that will be consumed.

In a simple way of talk, the volume of the model will more likely affect the cost. There is one thing you can do to lower the cost by hollowing the model. Yet, this way will affect the sturdiness of the object. This means you will have to do a trade-off, choosing between a sturdy model or a low-cost model.

3. The Complexity Of The Model:

Not all three-dimensional models are the same with each other. Some are made ready to print, some are made with many details and require a complex build as the materials. A simple model can be printed and finished quickly, and also need fewer materials. A complex model will take more time to print, consume more materials as electricity.

For example, a simple and normal brick of Lego will take just 40 minutes to print. This was assumed that the materials used to print are PLA or ABS plastics. On the other hand, a Millennium Falcon model will take about 3 hours to print while using the same material. The only bright side of this is you can charge your customers with a higher price tag for its complexity.

What Material Will Help In Lower The Cost?

How Much Does It Cost To Run a 3d Printer For An Hour

As mentioned, some materials will increase the cost of your project, some will lower the cost for more profits. Just keep in mind that almost everything on this planet has its price, and will affect how others see it. Furthermore, how much electricity does a 3d printer use per hour will be involved. For example, with the same model of a keycap, but using two different materials to print by a company. One is plastic and one is metallic, people tend to pay a higher price for the metallic one.

Enough talking, you will want to note down the price and the name of the materials below because they will change based on where you live. So, what material will lower the cost of your project? Shall we find out?

1. PLA:

This material is super popular for both beginners and experts for its quality and low cost. The one major thing that makes it a good pick for almost everyone in this material will not generate toxic smoke during the printing process. This makes it a lot easier and safer to work with for beginners. Furthermore, the average price is quite good too, you just need to spend around $15 to $20 for a kilogram of PLA.

The only downside of this material is it has almost the lowest melting point. This will make it cool down too quickly, making it hard to stick with the new layers. The solution for this is you’ll need to get a heating plate to prevent it from cooling down too fast. But ironically, the plate will increase the power consumption rate as the overall cost.

2. ABS Plastics:

This material is one of the most common and standard 3D printing materials for good reasons. Objects printed with ABS plastics are built with sturdiness, impact-resistance but still have enough flexibility for not too easily broken. Moreover, this one has a higher melting point than PLA so it can work with the nozzle quite well. This also means you will not have to buy a heating build plate to print them. The average price is quite good too, just $15 to $20 for a kilogram.

The only downside of using ABS is this material will create a toxic moke during the printing process. This means working with ABS plastics with no protection accessories such as masks or gloves can cause you hazardous illness.

3. PETG:

PETG or Polyethylene Terephthalate, is a cheap and popular material in many enterprises. They earn popularity by keeping the most amazing things from ABS such as sturdiness, impact resistance, and heat resistance. At its raw status, it is a see-through material, but when you heat it or cool it down, it will change to a non-transparent state. The downside of this material is it can be a bit of a challenge for beginners to work with. You can guess the price since it is widely popular in many industries, just $16 to $19 for a kilogram.

How Much Does It Cost To Run A 3D Printer Per Hour – Related Questions

How Much Electricity Does a 3d Printer Use Per Hour

I know that not all of us have the time to read all that and note every single thing down. In case you have skipped all of the mentioned, you might want to take your time reading some related questions that many people also wonder about. As a result, here are some noticeable questions around three-dimensional printing costs.

1. Is 3D Printing Cheaper Than Buying?

Yes, they are way cheaper since you do not have to pay extra for marketing fees, designing fees, and taxes. However, you will have to do a bit of study and exams to master 3D printing if you’re a beginner. Or another option is you can contact a 3D printing service and they will print it for you. All you have to do is give them the 3D model and get the money ready.

The idea of having a machine that can print whatever you need in your home is not new. This idea has been going around the world since the first Star Trek movie going out in the theater. If you are going to get yourself a 3D printer, you should consider this as a long-term investment since a proper printer is not cheap. But when you get to know the printer better, you’ll have the same product with 50 percent (or more) cheaper.

2. How To Know The Cost If I Live In The UK?

Easily, all you have to do is search “how much does a 3D printer cost to run UK”. The next thing you get is you will have a simple number for calculating. The basic number will be the price of the electricity in where you live. One more thing is the printer’s voltage and the printing time, which you will have to determine by yourself. The next thing to do is combine the numbers as above and you will have the exact number of costs.

3. Can I Make Money With A 3D Printer?

Yes, of course, you can, as long as you don’t sell copyrighted products. But if you are selling products that are made by yourself, you will be able to sell them with no concerns. Furthermore, you will have two options to make money with a 3D printer. One is you can charge the customers for printing their models and ship them to them. The other one is you can make your own product and sell them online or offline. Most people will choose to sell online because there are no rental fees and the ability to reach out widely.

4. How Can I Measure The Electricity Properly?

Is the method above too complicated? Here is a simpler way, getting an electricity monitor. This is a perfect way to determine the power consumption rate easily with a high correction. Or you can get a 3D printer with a built-in power usage monitor, which can have a pretty high price. This monitor will show the power usage in real-time everywhere in the world with a connected device.

5. Are 3D Printers High Maintenance?

They do need maintenance, but it will depend on how regularly you maintain the printer. Why? A recent study shows that 70 percent of 3D printers that use the printer often do not clean the printer properly. This will eventually make the parts break down too quickly, which will make the maintenance cost higher than normal. In the meanwhile, maintaining the printer often will help in lowering the maintenance cost and the production cost as well.

The Conclusion

Hope that scrolling through this article will help you in determining the cost if you’re getting into a 3D business. Or if you are printing as a hobby, it might help you know the cost for easier electricity bill calculating. So, do you know how much does it cost to run a 3D printer per hour now? I will just let you answer that question.

Further Reading: 

Can You 3D Print Keycaps? Yes or No – Tips & Instruction

Can You 3d Print Keycaps

Yes, of course, you can. But it will pretty much depend on many aspects such as materials or the design. But can you 3D print keycaps that actually work?

If you are wondering the same question, the following writing might be what you need.

A standard keyboard will use plastic switches such as a mac keyboard or any normal PC keyboards for example.

If any part wears out or is broken, it would be more likely to be the end of that whole keyboard.

However, if you are having a mechanic keyboard for yourself, luckiness would be on your side.

You can simply find a new part and replace them such as a keycap or a stand supporter.

How To Print Keycaps

As you know, looking for a single desired custom keycap is hard, it can be even harder if you look at its price tag.

A set of custom keycaps on the market can cost anywhere around 30 bucks.

In the meanwhile, the cost of 3D printing keycaps is just at 50 percent of the artisans one.

Not mentioned you can print them in any form you want, the only limitation is your imagination.

So, how do 3D print keycaps? Below is a simple instruction that you will need.


Related:

Can You 3D Print Keycaps? – The Materials

How To Make 3d Printed Keycaps

Many manufacturers are making keyboard parts in many shapes and materials such as aluminum or ceramics, but definitely not iron!

Iron or bronze can shock you with a small amount of electricity if they meet the right condition.

Being shocked when using a mechanical keyboard is not unusual, many considered this as a special thing of mechanical keyboards.

So, what material is suitable for 3D printing keycaps?

I got myself into some homework and discussed with people who printed their custom keycaps.

And as a result, the following text will talk about the most suitable materials for you.

1. ABS Plastics:

3d Printed Keycaps Files

This material is one of the most common in many printing projects for good reasons.

If you use this material for your printed caps, they would be built with sturdiness, impact-resistance.

Besides, ABS can work with the printer’s extruder quite well, which will make the printing process much easier.

The downside of using ABS plastics to print caps is they can be a bit flexible.

This is quite annoying if you use them for gaming. Also, you will need a heated bed if you want to work with the ABS.

2. PLA:

3d Printing Custom Keycaps

This one has the same property as the ABS but kind of safe.

Because ABS will produce some unwanted smoke while heating.

PLA will not, sometimes you can even find a sweet smell when working.

Using PLA for your 3D printed keycaps will offer toughness and impact resistance for the caps as well.

The one thing that will hold you down in choosing PLA to work with is its needed heat.

This material will cool down very fast, so you will need a heated bed, which will cost a lot.

3. Ceramic Resins:

3d Print Your Own Keycap

Buying a set of ceramic custom caps can be extremely expensive, but you can print a ceramic one now.

Using a ceramic custom cap will offer an exclusive and interesting looking and feeling.

Things you want from a mechanic keycap like sturdiness or toughness are also included.

But the making process is a complex task, you will have to study a lot for a better final result.

4. Aluminum:

This material will offer strong and lightweight 3D printed keycaps with the same quality as CNC.

Plus, aluminum caps will not shock you while using them because this material is not featuring electricity exchange.

The only downside of this material is it will cost more than the others.

But at the end of the day, an aluminum printed cap is always cheaper than an artisan one.

3d Printed Keycap Model

Metallic caps will add more fun to your keyboard

These are some materials you should use for your printed caps.

Of course, there are many more materials that can work well.

But they can cost a bit more than buying from the store and are quite hard to find.

Some will need the very best 3D printer to make keycaps and they can be expensive.

Can You 3D Print Keycaps? – The Possibilities

I will just assume that people who want to 3D print a set of custom keycaps are mostly gamers.

Who always want to replace their boring caps with more interesting and functional caps.

1. Custom Light Show:

Remember that time you paid hundreds of dollars for a gaming keyboard with RGB lights and the caps aren’t translucent?

Now with a 3D printer, you can make a keycap that shows lights in the shape you want.

3d Printer To Make Keycaps

Customizing your light sounds interesting

2. Unlimited Shapes:

When buying a set of caps with your wanted shapes, it can cost a lot.

But printing your custom caps will cost only half of the check and you will have every shape you want.

You can even print a Millennium Falcon as long as you can find its blueprint or you can design one.

3d Printed Keycaps

A starcraft keycap, why not?

In terms of FPS gaming, moving keys like “AWSD” are mostly used and will wear out for a while.

With 3D printed keycaps, you can use them in any way you want.

And even if they are broken, just simply print a new one.

3. The Colors:

3d Printing Keycap Set

3D printing allows you to choose every color you want.

This will help a lot in replacing a keycap with a specific color such as a Razer gaming keyboard.

Buying a replacement keycap from Razer will cost you $30 bucks, printing one will only cost you half of that.

4. Unlimited Material Choices:

How To 3d Print Keycaps

Are you bored of using plastic keys that do not give a satisfying clicking sound?

Printing a keycap with aluminum or ceramic will do it.

Again with the cost, most of the metal caps on the market will cost somewhere around $50 bucks.

Printing one will only cost you $20 for good reasons.

You won’t have to pay extra for taxes, designing, or marketing costs yet still have the 8/10 overall quality.

However, the quality will depend on your printer, blueprint, and your skills.

This means you will want to do some homework for a better result.

Can You 3D Print Keycaps? – The Disadvantages

3d Print Keyboard Keycaps

Just like everything on the planet, printing your custom keycaps will also have some downsides.

So before making one, you should take a quick look at some things that will hold you down. Shall we?

1. The Quality:

Just like printing your personal Legos brick, a printed keycap will not have the same quality as the manufactured ones.

Even how good the printed version is, it’ll kind of be less solid when being compared to the artisan version.

That was about using plastic materials such as ABS or PLA, how about metallic materials like aluminum?

It will not have a better overall quality than an artisan one at all.

Some keycap businesses forged the caps with proper techniques, all we do is just print and sand. So, you already know how it ends.

2. Less Collectible Value:

3d Printed Resin Keycaps

There are many people collecting limited edition keycaps as a hobby, like collecting arts or sneakers.

For them, having just a limited edition keycap with an affordable price is the most enjoyable part of the game.

Since 3D printing artisan keycaps are not as rare as they used to be, their value will also decrease.

This will take away the “limited edition feel”.

Remember when you finally have that rare car and then turns out they are everywhere on the streets in GTA?

It is just like that.

Unless you find super rare materials and somehow turn them into a printable material, then the feeling will be back.

3. Less Artistic:

Cost Of 3d Printing Keycaps

If you’re going to buy an artisan cap, it would be filled with arts from the top to the bottom.

You will find the exact design and color the artist put into it, and it is pretty much hand-made.

Plus, they can have multiple colors on a single surface, which is difficult (not impossible) to make with 3D printers.

3d Printing Keycaps

The ultra-quality of an artisan keycap

How To Print Keycaps? – The Instruction

Since we have learned a bit of information about 3D printing keycaps, let’s leave the stage for the printing process.

You just simply search “3d printed keycaps download” if you’re using a common mechanical keyboard such as Razer Blackwidows keyboards.

Otherwise, you will have to design a cap for yourself or edit the dimension of the downloaded blueprints you got.

So, straight into the instruction, I will just assume that you are using reins for goods.

1. Measurement:

Best 3d Printer For Keycaps

Like being said, all keyboards and their caps are different, you will need to measure the caps correctly.

Make sure that the dimension is correct by millimeters.

You don’t want to finish the printing process and find out the fit is wrong.

2. Designing Job:

People on the subreddit called “3d printed keycaps download” advised that you should edit the blueprints you found online.

For easier purposes of course, or you can design one for your custom keys.

3d Printed Keycap Cherry Mx

3. Choosing Materials:

This part is one of the most interesting parts of the game.

The final result will most likely depend on the material you choose.

Just make sure that the material is not electricity exchange and will not shock you while using it.

Materials such as iron or bronze are an absolute no-go.

You can choose them if you like the feeling of being shocked, it’s like keeping you interested in the game!

3d Print Mx Keycap

4. The Printing Process:

At this time, you will want to make sure that the printing bed is clean.

You don’t want the cap to slip away when printing and the nozzle to start splitting around.

One more thing, make sure that the material will not run out in the middle of the printing process.

You can pass this if your printer is featuring sensors that stop extruding when the materials run out.

3d Print Pbt Keycaps

5. Finishing:

You will want to sand the surface of the printed keycap for the best feeling when using it.

Or you can leave them rough if you want it to be that way, it is all up to you.

You will need to dip them into alcoholic liquids such as acetones if you are using ABS or PLA.

There you go, making your personal set of custom keycaps is just that simple.

If you are looking for advanced techniques, you might want to do more research and experiments.

This will depend on your love of custom caps, and as they all say – possibilities are endless.

The Related Questions about “Can You 3D Print Keycaps?”

3d Printing Keycaps Reddit

1. Can You Sell Your 3D Printed Keycaps?

Yes, you can. Many people out there are selling their 3D printed custom caps for years with no legal problems looking for them.

Yet, make sure that your products are not copyrighted because there are companies that will sue you for that.

Especially big companies, they will sue you not for money, but for fame and they will love to do it.

3d Printing Artisan Keycaps

2. Where Can I Find Blueprints For My Project?

There are many sites that will allow you to download blueprints for free.

Sites like thingiverse.com and yeggi.com are super popular in the 3D printing community.

Or you can look it up on Reddit.com, they have a big community and the users are super friendly.

All you have to do is just ask them and they will answer whether they know the answers or not!

Funny how.

3d Printed Keycaps Download

3. How To Dye Colors On A Keycap After Printing?

Here is a super simple guide.

First, you will want to cover the letter or number/symbol if you don’t want to paint them.

Secondly, dip the caps into the paint, let them dry for a couple of minutes.

After they are completely dried, polish them with a clear finish.

Repeat this step two or three times for a better result and they will be ready to be used.

3d Print Keycap Mold

4. Do I Need A 3D printed Keycap Puller?

Yes, you will need them.

Mechanical switches are super hard to pull out and you don’t want to misplace or damage the caps when pulling them out.

If the caps get damaged when being pulled out, you will have to print a new one.

This will cost lots of time for nothing obviously.

5. Do I Need The Best 3D Printer For Keycaps Printing?

3d Print Keycap Stem

Not exactly, if your purpose is just printing caps, a mid-tier printer would do just fine.

But you can always get a high-end printer if you can afford it without breaking the bank.

The better the printer is, the better the final result will be.

Final Thoughts

In a simple way of speaking, 3D printed keycaps have their place on the market.

As long as they are not copyrighted, their path will not cross the artisan’s path.

For people who do not want to pay over the head for artisan caps, printing one will do just fine.

So, can you 3D print keycaps now?

Further Reading: 

Changing Filament Ender 3 – How To & Must-Know Things

Changing Filament Ender 3

One of the most common things to do when having an Ender 3 printer, changing filament Ender 3. This task is one of the things that have less joy and is quite annoying. Still, it is a certain thing for the Ender 3 to work properly. Also, replacing materials involved many printing techniques. Which we will discuss shortly.

Since the Ender 3 printer has evolved so far and reached out to so many people. Yet, some of us still have the idea that replacing the materials is a challenging and time-consuming task. Not quite, for many reasons, this task does not have to be boring as we thought. As a result, I have done some homework freely so I can share it with all of us.

So, in the following text, we’ll discuss some noticeable information, tips and tricks, and how to load filament Ender 3. Plus, a simple step-by-step instruction that will deliver an easier changing and replacing materials process. So, shall we begin?


Related: 

Types Of 3D Printer Filaments

How To Load Filament Ender 3

In terms of definition, 3D filaments are a special type of plastics called thermoplastics. Unlike the normal 2D printer that uses liquid ink. The 3D printer will heat the filaments to the right temperature, make them flexible, then extrude them via a nozzle. This flexibility allows the printer to sculpt the filaments to create the desired shape. But this process has to happen in a very short time to prevent the filaments from cooling down.

Because there are lots of 3D printing materials floating on the market. Consequently, some people will get confused in choosing which one to work with. Not mentioned, some materials are banned or illegalized by governments for some safety purposes. And as a result, here is a list of some printing materials that can be easily found on the market.

1. ABS Plastics:

This is one of the most common and reliable replacement filaments Ender 3 for good reasons. ABS plastics are built with sturdiness, impact-resistance yet still have enough flexibility. Moreover, this one will cooperate with the printer’s nozzle quite well. This means the heated materials can be easily extruded, which makes them very easy to work with.

Replace Filament Ender 3

A 3D printed object made out of ABS plastics

In terms of use, ABS plastics will be a good choice for printing automotive parts, kitchenware, or even toys. Many people choose this material to print Legos for good money. Despite all that, there are still downsides existing. Being a plastic material, it will need a heated print surface. And as you may know, a heated surface can be quite costly. More than that, the printing process can create unwanted smokes, which can be inconvenient for some people.

2. PLA:

This one is also popular for both amateurs and professionals for its great property. The main thing that makes it a good choice is it will not produce toxic fumes in the printing process. Sometimes you can even find a sweet smell because this one is sugar-based. This means it is safer to work with if being compared to the ABS plastics.

PLA 3D printed elephant

PLA 3D printed elephant

At this time, the idea that PLA will be a perfect solution in changing filament ender 3 may appear in your mind. Not yet, there is some downside of this filament that you will need to carefully consider. First of all, PLA has a way lower melting heat than ABS plastics. This will reduce the overall sturdiness of the final product and make it weaker. Sturdiness plays a big role if you are working on printing moving parts or exposing parts to high temperatures. If those are not your problems, then this material will be a good choice for your project.

3. PET Materials:

PET – Polyethylene Terephthalate, is a common and popular material in many industries. You may have noticed the name quickly because almost every plastic bottle out there is made of this PET plastic. At its raw nature, the PET has no color and it is crystal clear. But if it makes contact with temperature on both high and low, it quickly changes to a non-transparent state. The only downside of this material is it can be a bit of a challenge to work with for beginners.

PET materials

Examples of the PET materials

This material can do both stability and safety greatly, and it will not produce an unpleasant smell in the printing process. Plus, this one is recyclable, which means it is harmless for the planet Earth and its tiny humans. This also means you can use this filament to print objects that will contact the food directly. Cups and plates, or even lunch boxes are also included.

4. Nylon Materials:

Polyamide or also known as nylon is another popular choice for both amateurs and professionals for good reasons. Being a synthetic polymer filament means this one is stronger and has more durability than both ABS and PLA. Plus, this one can be re-melted so you can use it again with no worry of bonding loss.

Yet, before considering changing filament Ender 3 with nylon, there are things you should notice to prevent wasting your time. Firstly, this filament will need very high heat to melt (210°C – 250°C) and will produce a toxic smell. This means it will not be safe to print with no protection and obviously, it is not food-friendly. Furthermore, this filament is very easy to absorb moisture, so you will have to properly store it.

Changing Filament Ender 3 – Step-by-step Guide

Load Filament Ender 3

1. Removing Current Filament:

Before loading the new filament in your 3D printer, you will need to remove the old one.  Firstly, you will want to reheat the nozzle to the melting temperature. This temperature depends on which filament is currently filled, you can find the needed information about it on the spool.

Turn on Ender 3, open the menu by clicking on the control button. Get to the control settings section, click the temperature button, and then select nozzle settings. Wait until the hotend gets to the desired temperature, then extrude the remaining filament and pull it out. At this time, the Ender 3 is now ready for the new material.

2. Load New Filament:

As you have emptied the nozzle, you can now insert a new one. The first thing to do is sharpen the material spool with an angled cut. This will make it easier to feed into the extruder. The second thing to do is carefully insert the sharp end to the Ender 3 extruder. Push it until you feel a slight resistance, this means the material has reached the end of the nozzle and you can start printing now.

Changing Filament Ender 3 – Frequently Asked Questions

1. How To Load Filament Ender 3 Pro?

Loading filaments on Ender 3 pro is the same as the normal Ender 3. In case you have skipped the guideline above, here is a super shortcut to the instruction. First of all, turn on the printer and heat the nozzle, and extrude all current materials. Secondly, cut the new material sharply, then insert it into the printer and you are good to go.

2. Can you change filament mid-print Ender 3?

In case you want to have a multicolor 3D printed object or something like that. Changing filament in the middle of the printing process sounds like a good idea. All you have to do is pause the printing process at the moment you want to change the color firstly. Secondly, pull the extruder lever and then pull out the current filament. Thirdly, insert the desired filament and just continue the printing process.

3. What Will Happen If You Run Out Of Material In Mid Print?

How To Load Filament Ender 3 Pro

The answer to this question will depend on which type of 3D printer you’re using. If your printer comes with sensors such as the Ender 3 and Ender 3 pro. Then, the printer will instantly pause the printing process and only continue when you insert more materials.

Besides, the sensors can also detect and automatically pause the printing process if the filament is stuck. Sounds good? So, what will happen if your 3D printer doesn’t come with sensors and runs out of the main mid-print? This does not sound good, let’s find out!

A printer with no sensors can not know if the filament is out. As a result, it will keep printing and moving the nozzle like there is material to extrude until the finishing phase. As a result, your object’s shape will stay at the time the materials stop coming out/restarting the printing process is a must.

Conclusion

Since we have learned a bit about some common materials on the Ender 3 printer and changing filament Ender 3. Hopefully, this writing will help you out in the 3D printing game and also helps in preventing troubles while printing. But this is not all, there is still lots of knowledge and things we must know for a better final result. Which we will learn in the future.

Further Reading: 

Ender 3 Glass Bed Cleaning – Tips & Complete Guide

Ender 3 Pro Glass Bed Cleaning

Ender 3 glass bed cleaning seems to be an easy task, but it can be a bit of a challenge. Still, many people are having trouble cleaning the 3D printer plates properly. Independent research for the most effective 3D printer plate cleaning is made. This will be put in discussion in the following text.

Many tests and real-life practical experiments show us that the 3D printing process can be a failure for many reasons.

One of the most common reasons is made by the printing plate.

The part that is not always clean properly in both terms of visible and non-visual.

Consequently, making sure that the plate is properly cleaned will more likely raise the success rate of the printing process.

How To Clean Creality Ender 3 Glass Bed

A common problem with the 3D printer plate is after a long time of use, there will be leftover materials.

That will stick on the surface when you remove your 3D printed object. The worst thing about this is how thin and stick it is when you try to remove it.

And more than that, it will affect the printing process in future projects in a bad way. It can be worse if the printing plate surface is made out of glass.

And as you know, glass plates are very expensive and easy to scratch.

So, how do you clean your ender 3 glass bed?

Ender 3 Print Bed Cleaning

The first thing most of us will come up with just dips some cloth into soaps or cleaning compounds.

Things like windows cleaner or dishwashing liquid are involved.

Then, leave it for a minute to dry and give it a second wipe as a final step.

This way will work, but it will not be effective for a long time. You will have to do it over and over again.

While we are talking about ender 3 pro glass bed cleaning, the following methods will make your printer bed as good as new.


Related: 

Some Notable Beds Types For Proper Ender 3 Print Bed Cleaning

How To Clean Ender 3 Bed

Many 3D printers are being made and introduced to the market nowadays.

Each model has different unique shapes, but there is a certain thing that every printer needs the printer plate.

They come in many shapes, thermal property, and price tags.

As a result, to utilize the cash you spend, here are some of the common examples based on their property.

How To Clean Creality Ender 3 Bed

1. Glass Printer Plates:

Printer plates made out of glasses have a high level of toughness and have earned their reputation since the beginning.

Being made of glass means these plates can not be bent over time and will always offer a solid surface.

And also, these have low thermal conductivity, which means it will take more time to heat up.

But on the other hand, the heat can be spread evenly on the build area or even to the edges.

Glass Platen Printer

A typical glass printer plate

You can use things such as glue sticks or hairspray to add more adhesive to the glass plate surface.

This way you can prevent the freshly printed object from slipping while printing, especially with the ender 3.

Giving the ender 3 glass bed setup increased smoothness to the printed bottom surface.

2. Anycubic Ultrabase:

This kind of printer plate has a special feature applied directly to the surface.

This will offer an automatic stick to the printed object if having enough temperature.

But it can also release the object easily when it cools down.

Anycubic Ultrabase

A better view of the Anycubic Ultrabase

In a simple way of speaking, this Ultrabase is developed based on glass plates.

So it will have all the good qualities such as toughness, flatness, and even thermal conductivity.

But, it will not offer the same level of smoothness as the glass printer plates.

Plus, the overall quality will reduce over time and will get damaged if it’s not properly used and maintained.

3. BuildTak FlexPlate:

Just like the name, this kind of printer plate allows you to pop off your printed object when the printing process is done and the heat is down.

But the downside is it needs to be applied on a perfectly smooth and rough surface.

A glass printer bed will be a good choice in this case.

Buildtak Flexplate System

BuildTak FlexPlate ability

Also, this kind of print plate surface will not stick to the object if the plate is not placed on a flat surface plate.

This means your freshly printed object will more likely to form undesirably to fit the underneath surface.

Ender 3 Pro Glass Bed Cleaning – How-To

As being said, cleaning your printer is a certain thing.

Because leaving your printer plate dirty or full of leftover materials after printing processes is the last thing you want.

It will reduce the overall quality of the next printing project in both terms of looking and feeling.

Or it can be worse, it will destroy all the effort you spent for days or even months. “I would punch myself in the face if something that could have been prevented happens because I was lazy”.

Ender 3 How To Clean Bed

1. Unstickable Surface:

As mentioned, after a while of use, the printer bed stickiness will more likely be reduced.

It will lead to cases such as the object will slip more or less in the printing process.

And as a result, the printer head will extrude the materials in the wrong place.

This will pretty much destroy the project, and you will have to restart the printing process.

3d Printer Bed Surface

A result of dirty and nonstick printer bed surface

Or in a worse case, the printer head will start spreading the outcoming material everywhere.

Consequently, you will have to clean all your ender 3 glass bed setup, and it will cost lots of time.

Plus, it can be worse if you are working with materials that have high temperatures while printing such as ABS or PLA.

And trust me, you will wish it was a Legos brick for you to detach them from your desk.

2. Bad Final Results:

Obviously, dirty and full of scratched printer beds will not give you the best final result.

In another way of speaking, the surface that faces directly to the printer bed will more likely have no smoothness.

It can be holes or curled-up points, especially if you are working with materials that need temperature for printing.

3d Printer Glass Bed Cleaning

As a result, you will have to sand them off manually.

Let’s be honest, this will not be happening if you clean the printer bed in the first place.

Plus, at the end of the day, it is you who have to clean your ender 3 glass bed. But the cleaning liquid will be your tears!

3. Damaged Printer Bed:

If you keep using the 3D printer without cleaning them properly, you will eventually damage the printer bed.

As a result, replacing a new one will cost an amount of cash and it can be more than you think. Let me tell you why!

Ender 3 Pro Glass Bed Cleaning

A damaged printer bed will deliver a terrible final result

First of all, say, you are using the printer for a month now. At the time you type “how to clean ender 3 print bed” into the search bar.

You have no idea that it was too late. Secondly, even how hard you try to clean the print surfaces, the material keeps sticking to the surface.

So you use more force to clean it, that is the moment you start giving the print surface more scratches.

And as a result, you will have to spend your money on the new printer bed.

Because even the old one is clean, it will not give the best final result.

4. Professional Look:

Ender 3 Glass Bed Setup

“Success usually comes to those who are too busy to be looking for it” – Henry David Thoreau.

A dirty and not properly maintained printer will not offer a professional look in people’s view.

So many people ignore this, but it is one of the most important things to succeed.

If someone is printing for fun and no one is paying them for what you printed, then he/she can skip this.

Or in case someone works with other people on a project.

I note that the printing setup represents the tools.

This can be considered as the ability rate of work.

How To Clean Ender 3 Glass Bed

Ender 3 Glass Bed Cleaning – Where To Start

First of all, how to clean ender 3 bed properly.

There will be tools you need. Many tools work out, but there are 3 must-have things.

Firstly, a ruler, scraper, or something similar.

You will need these to wipe out the surface. But don’t use something with sharp edges such as knives or scissors.

You will rather buy a new print bed instead.

Ruler 3d Print

You can use a ruler instead of a scraper

Secondly, paper towels, especially soft paper towels are highly recommended.

The third one, cleaning liquid. Don’t use liquid that creates too many bubbles or foam such as dishwashing liquid because it’s going to be a hassle on the printing surface.

Last but not least, a pair of gloves. You will need these because you will use your hands to clean your ender 3 glass bed.

How To Clean Ender 3 Print Bed – Complete Guide

How To Clean Ender 3 Print Bed

Since you have needed things, let’s dig into the job. You will want to unplug the power source for safety.

Safer is better, isn’t it? But there are a few things you should keep in mind.

One is if you want to do the job with a scraper or something like that.

Make sure that you use enough force on the surface.

Using less force won’t do a thing, or too much force will damage the print bed.

But if you can balance your force, your print bed will be effectively clean in a surprising way.

Some people will hold the handle with one hand and the other one will push down the edge at the middle area.

Ok, let’s start:

Ender 3 Glass Bed Settings

1. The first step, spray the right amount of cleaning liquid on the print plate surface. Let it hang out for a minute.

At this time you can see some bubbles appear on the glass bed ender 3 surfaces.

2. Secondly, use your finger or something with no edges to spread and mix up the liquid directly on the surface.

Then spray for a second time, let it sit for a while, and do the same thing.

You can apply for the third time, but this is optional, it depends on the print bed surface cleanliness.

3. The third thing to do is place your ruler or scraper on the print bed surface at an angle of 45. Push it on the surface in a straight line.

Use paper towels to clean the edge. Repeat the action until the print bed is completely wiped.

How To Clean Creality Glass Bed

4. Lastly, spray the last layer on the print plate surface and use the paper towels to wipe the surface until it is completely clean.

One more thing, you should avoid using a cleaning liquid with abrasive compounds.

Cleaning liquids with around 70 percent alcohol, if you use liquids have a higher alcohol rate.

It will more likely damage the printer bed surface by leaving scratches.

This makes the future materials will no longer stick to the printer plate in the printing process.

At this time, your printer plate surface is now properly clean, but this method is for normal and usual leftover materials.

In case the leftover materials stuck on the surface are printed at a high temperature like ABS or PLA.

Then you will need some specific things.

1. Cleaning ABS:

Creality Ender 3 Glass Bed Cleaning

Cleaning ABS plastic will require cleaning liquid with extra removal power such as polish removal.

Most people will choose this option because it will easily dissolve ABS plastics.

This way will make it easier to clean.

More than that, with the extra removal power and easily dissolve, so it will need less force to be properly clean.

This can be considered convenient. Plus, this way just needs a minute to dry.

One more thing, you don’t have to heat the leftover materials for easier ender 3 glass plate setup cleaning.

2. Cleaning PLA:

Creality Glass Bed Cleaning

Since this material has been the most popular in 3D printing. But being a plastic material, they can be a bit of a challenge to clean.

The cleaning method above will do just fine.

But many assume that if the next printed layer has the same color as the leftover materials.

There will be nothing bad going to happen. It is, but sometimes bad things happen, and the printed foundation may slip and your project will be more likely destroyed.

Keep in mind that a properly clean and maintained printer will always deliver the best final result as it can. But to earn that, you will want to clean the printer regularly.

Because no matter how hard you try to prevent the leftover materials after printing.

There will be more or less of a chance that some extra materials will stick on the printing plate surface.

How To Clean Ender 3 Glass Bed- Frequently Asked Questions

Glass Bed Ender 3

Since some cleaning tips, why should you clean, and a basic guideline in cleaning the print plate surface is discussed.

There will be things that many people are wondering about.

The first thing to say, the time and effort that the cleaning process cost will depend on many things.

Such as how clean or dirty the print surface is, or what leftover material is stuck on it.

The second thing, different kinds of print plates will need different requirements to be properly clean.

Things like cleaning liquids, tools, or wipers are also included.

1. How Can I Make My Glass Bed Adhesion Better?

Technically, adjusting the print plate surface temperature will more likely increase the adhesion of the print surface.

This happens because the first layers tend to cool down too quickly in the printing process.

As a result, there will be more chance the materials will not stick to the glass print plate surface.

Heating 3d Printer Bed

A simple explanation on how heating the printer bed will work finely

In case you are stuck with print plate surface adhesion problems.

Many suggest that you should try increasing the printer temperature a bit higher.

Start with increasing 5-degree increments at first. Then try adjusting it for a suitable temperature.

2. Does Acetone Dissolve PLA?

Many people have the idea that using acetone will dissolve PLA leftovers, it will not work effectively.

Cleaning liquids such as bleach or acetone will only soften the leftover PLA plastic.

But in case you are thinking about cleaning the ender 3 glass bed set up properly, you will need a better one.

As mentioned, cleaning liquids with 70 percent alcohol are highly recommended.

They can wipe out buildups finely with no hassle. And also, it will more likely cost less time and effort.

Ender 3 Glass Bed

3. Does PLA Need A Heated Bed To Clean up?

In case you are talking about using heat in the cleaning process.

Then the answer would be yes, you will need some heat.

As PLA materials will soften with the right amount of temperature.

So you can use this property in the ender 3 glass bed cleaning process to make it easier.

How To Use Ender 3 Glass Bed

Ender 3 Glass Bed Cleaning In Conclusion

“Every problem is a gift – without problems, we would not grow”, said Anthony Hopkins.

So if something bad happens in your 3D printing project.

You correct the mistakes and start-up with what is left.

Things like the freshly printed object slip away while printing or undesired rough surface can be involved.

But you can always prevent them from happening. It all starts with a small step, clean your equipment.

If you want to stand on the right side in terms of 3d printer glass bed cleaning.

Then you will want to properly clean and maintain the printer plate. Trust me, it is not going to be a waste of your time and effort.

Hopefully, your Ender 3 glass plate cleaning process will work out and your equipment can be as good as new.

Further Reading: 

Cura Ironing Settings & Cura Ironing Functions – The Guideline

Cura Ironing Settings

Three-dimensional printing is now easier to approach than ever. But there are still existing problems such as the final result’s rough surface. As a result, the solution will be ironing on cura and Cura ironing settings play a big role in giving the surface smoothness.

First of all, common knowledge. 3D printing is the building process of making three-dimensional solid objects from digital files. The object will be produced by overprinting the materials in layers upon layers.

Secondly, there’s a simple thing about the top surface of 3D printed objects that some will consider as a downside. Which does not usually have a perfect smoothness, especially small objects. As commonly, people will smoothen them by sanding the extra materials off, manually.

However, this way will cost more time and effort to have a satisfying-looking surface.

Consequently, many will ask how to shorten this process off yet still have a good-looking final result. As a result, a European company suggests their three-dimension printing software, they named it Cura.

They will offer you two options. One is free and another one will cost a small price ( which is suitable for companies or mass producers). Yet, the functionality you will have is just unbelievable, let’s dig a bit deeper about this.


Ultimaker Cura Ironing – What Is It

Firstly, an introduction. Built in 2011, Ultimaker is a famous 3D printer-producing business with its headquarter located in the Netherlands. More than that, they offer FFF 3D printers, branded printing materials, and develop three-dimensional printing software. Which will work on different operating systems including Windows, Linux, and macOS.

1. What Is Ironing Cura:

Ultimaker Cura Ironing

In a simple way of speak, it was and is a developed open-source slicing software for 3D printers. More than that, it works by slicing your model file into layers and forming a printer-specific code (geometric code). Next, the printer will receive that code for the making of the solid objects.

2. The New Features:

At the moment of research, the fourth version of Cura has been released. Which offers a brand new simplified user interface, making this one more fitting for a wide range of user skills.

Thanks to this, 3D printing now is a lot easier to approach for beginners. But this does not mean that it will lack function for experts. Many advanced options are added for a better experience.

Therefore, you can use this software from the beginning to that time you will master all of the skills, levels, and workflows.

3. Custom Mode:

This mode allows you to access full control. So you can change over 300 separate slicing settings. More than that, you can also have full control over the adjustable panel to keep all your settings visible or hide them.

Besides, it allows you to focus on your model as quickly as demand. Which is a common need of many three-dimension printing software out there.

4. Marketplace:

Have you ever worked on your model and later realized that you don’t have the needed materials? So, here is the thing you need. Before you go to the cura ironing settings, there will be a feature called ‘’marketplace’’ on the main interface.

cura marketplace materials

Cura marketplace

This marketplace section allows you to easily access the materials forms and plugins. 6re than that, this feature will show you support sites online and extra lines for product descriptions.

Also, the supplier websites link will be included so you can easily purchase in an instant. Isn’t that great?

5. Remote Printing:

The most amazing feature yet, at least in my point of view, remote printing. This will allow you to send and control the printing process anywhere through Ultimaker Cloud. And clearly, as long as you have an internet connection.

All you have to do is log in to your Ultimaker account first. And then, the rest you have to do is just control it as normal. But you will need a 3D printer made by Ultimaker itself, each account can only link one printer, at least for now. And also, this feature is only available on the Ultimaker 3 and Ultimaker S5 3D printers.

Cura Ironing Feature

Almost forgot the note from the manufacturer! You will want to update the latest firmware on your printer for the best final result.

6. Backups:

In case you are a remote designer, then you will love this feature. This one will keep your options or Cura ironing settings in the cloud. Offers a whole next level of convenience, you can work anywhere, and anytime you want.

Firstly, an internet connection and an Ultimaker account are required, just like mentioned above. Secondly, just as usual, access your files and keep up with what you left off. Also, an account can store up to 5 backup files, at least in the time of research.

Cura Ironing Tips – Cura 3D Ironing

Since a bit of information about Cura and the needed conditions for the finest experience has been put on the table. But there are many things you have to pay a bit more attention to avoid material and effort loss. So, here is some notable information about Ultimaker Cura ironing for you.

Cura Ironing Ender 3

1. History Time:

The very first idea of sanding the surface of three-dimensional printed objects was first suggested by a user on the Ultimaker forum in 2016. Neotko – the username of that user – called it “Neosanding” as a prototype. Which will smoothen the top surface by “Simplify3D”.

The ideal works by running the printer head for a second infill phase on the printed layer. Which is set at the height with the least extrusion rate possible. This method was later used by Ultimaker themself in the new Cura slicer.

2. How It Works:

In a simple way of speak, you will have the smoothness you want by running a second print phase on the outer layers. That’s all, but if you want a closer look, then here you go.

As you may already know. When the printer’s hot nozzle goes over the newly printed layer. Any plastic that may have folded up will be flattened, in an instant.

Also, there can be holes on the top of the surface as you know. But they are filled via a small amount of material by the nozzle as it goes by.

Plus, normally, the ironing nozzle is angled with a fixed degree of 45 compared to the first printing phase. Which will offer a much better final result.

iron surface treatment

A comparison between ironed and unironed surfaces for a clearer view

3. When Should You Ironing On Cura:

Ironing is extremely useful with 3D-printed objects that have flat top surfaces. Including name tags, badges, or boxes, and countless more. Which will need a level of smoothness for whatsoever reason there is.
And also, it can be more useful if you want to glue 2 objects together. Because you can’t just stick things together with glue when the space between them is not reduced. So, smoothing the surface is a must if you are intended for such things.

3d printer surface ironing

One more example of ironing 3D printed surfaces

But ironing will not work for objects with rounded shapes or basic shapes in common or even figures. And also, it will not work on things that have flat parts but are not aligned with the printing plate. All of this because of the 45 degrees angled printer head as mentioned earlier.

But keep in mind that there are things that can be printed upside down. This means the top surface will not have a smoothness level like the bottom surface. Which is faced at the printing plate (this is up to the printing plate surface you are using).

Hence, if you properly adjust the Cura Ironing settings, your final result will be even better.

4. The Downside:

The only 3 main things that make the cura ironing option considered as an inconvenience are the times it takes. Which will likely increase the total time that will cost your three-dimension printing project. But you can see the time that costs in the preview section.

Cura Ironing Option

Also, if you are planning on things that have a big surface area. The first thing to do is make sure your printer will not get overheated in the process. This will more likely happen on most models because of the slow and small extrusion during ironing.

Which is the main problem that leads to overheating when printing, especially PLA because of its low-temperature resistance.

And another downside is sadly the looking problem, which leads us here in the first place. Instead of having a perfectly satisfied look, you will be disappointed if you pay serious attention to the edges, for example.

So if you design a star and print it into a solid object. Maybe the bright side is you will not be cut by the edges.

This happens mostly and because we plan the toolpath for small extrusion. While the nozzle, in terms of physics, is still at the same size. And as a result, some of your materials will leak out, mostly on the edges. Yet, you can take care of this easily by sanding them off, manually.

Using Cura Ironing

Cura Ironing Top Layer

When you are done with the materials, designing, and pre-processing, let’s hit the Cura ironing settings section. Although, using the software properly is not too difficult nor an easy task, the ease to learn is admirable.

But if you want your final result to have the most satisfying finish possible. Then, there are a few things that you will want to check before processing.

1. Cura ironing settings:

Firstly, you will have to make the ironing feature visible in the toolbar under “Settings” and “Configure Visibility”. And then, enter “Ironing” in the search bar and make sure that the box is ticked. Next thing, you will see the feature in the print settings placed right under the form.

2. Materials:

As far as you adjust the settings for a better final result. Which will cost lots of time and effort. But luckily, there will be nothing much to adjust no matter what material you use.

Say, your Legos battleship blueprint requires ABS plastics at the time you adjust the settings. Yet, you changed your mind and you want to use PLA plastic instead. That works too.

3d printer material types

Some common materials in 3D printing

However, each material has its specific properties, and using conditions. This means different materials will offer different final results. Therefore, you will have to do a bit of homework before choosing the materials for your 3D printing project.

3. Calibration:

First, the looking problem mentioned above can be fixed, mostly. So, all of this comes from an uncalibrated or improperly calibrated nozzle.

Furthermore, the nozzle will drag the extra plastics to the edges of the top surface. Which will make your product look a bit unsatisfied and you will have to sand them off, consequently.

Second, in case you are using an Ultimaker 3D printer, then you should have no worries about calibrating the nozzle no more. All you have to do is turn your devices on and select Cura ironing, that’s all. This means the calibration is preset and just waits to be used.

Cura Ironing

Third thing, or if you are using a custom 3D printer for your projects. Then you will have to experiment adjusting with the ironing flow, speed, and line spacing.

Besides, the ironing process is extremely sensitive to specific extruder calibration. Which means it will cost a lot of time to find the right setting. As a result, you will have to walk a path full of trials and errors.

4. The Printer:

For normal 3D printing projects, FFF 3D printers (fused filament fabrication) will do finely and precisely.

Though, if we are talking about using Cura ironing settings, injection molding will be a safe option.

Ultimaker 3D printer S5

Ultimaker 3D printer S5

All because FFF 3D printers are made to be suitable for large objects like Legos plates or something like that. But these kinds of printers have low precision. If your project demands a nozzle running on high precision. Then, you will have to pay a bit more for that (Ultimaker sells FFF 3D printers)

On the other hand, the injection-molding process will more likely offer a higher accuracy final result. Which will be a pretty good option for ironing surface models.

Cura Ironing Settings And Following Questions

1. What Is Ironing In Cura?

Cura ironing is a process where the nozzle goes for a second time after printing. Therefore, offer a smooth surface for the 3D printed object. Also, the ironing surface has to be the top layer.

The ironing settings can be set so you can have the wanted surface finish. This means you can choose ironing in pattern, or only ironing the highest layer. And it is just like any other 3D printing software out there.

2. What Is Cura Ironing Problem?

The problem of Cura three-dimensional printing software is made to work at its best on only new Ultimaker printers. Which is quite expensive for some people such as beginners or small manufacturers.

This is like Apple.Inc is doing with its products. Forcing the users to join their ecosystem by only supporting products that they developed. But I and many more wouldn’t consider it as a problem but it will be a disadvantage.

But the bright side is you will have the most convenient and comfortable experiment. Which is hard or can not be done if you mix up devices between different producers.

3. What Is G-Code?

G-code is a language that humans have created lately. We use this language to tell machines how to do something.

For a closer look, in 3D printing, g-codes include commands to move or remove parts inside the printer.

And there’s more, g-codes are involved in much complex information. And if you open a g-code in the text editor interface, you will see the inside information. But if you are not familiar with it, then it is more likely to make no sense and hard to understand.

Also, most g-code is automatically built by a three-dimensional printing software, such as Cura. As a result of being computer-made, the g-code can be hundreds of pages long. Which contains thousands of print head movements involved in 3D printing.

But not all 3D printers out there can handle g-codes. And some will use other units and formats instead.

Ironing In Cura

4. Is Nozzle Important In Ironing?

As you already know, the nozzle is a very big part of 3D printing. Which will extrude the materials into solid objects using thermal heat energy.

In terms of sanding surfaces, you will have to do a trade-off between rough edges or rough surfaces.

Besides, the bigger the nozzle size, the more mass, and surface space available for the transfer of the heat to the materials. This makes the printing process more effective with the extrusion speed of the nozzle.

But ironing surfaces is a difficult job and needs the right amount of materials for the best final result.

Conclusion

Being said, ironing is an amazing tool for sanding 3D-printed surfaces. It does the job so well that you may have no idea which side is the ironed side. Both sides will look the same and other people will need lots of attention to know which one is ironed.

However, to have all that, you will need to properly adjust your Cura Ironing settings. And lastly, hope that you will have the smoothest printed surface on this planet Earth.

Further Reading: 

Can You 3d Print Legos? – The Ultimate Knowledge

Can You 3d Print Legos

“Can you 3D print legos?” This is the question that comes up first from people who considered buying 3D printers. Usually Lego addicts. In case you are wondering the same thing, we will put this on the table in this article. 

When it comes to 3D printings, what hit your mind first? Interior parts, toys, and Lego, at least that is what I think of first. It can be fun, joyful, and innovative. It is quite difficult to imagine someone might get a boring feeling in 3D printing legos. However, if that feeling hits you, maybe the lack of information caused it. So, shall we begin?


Why Can You 3D Print Legos?

3d Printing Legos

To begin with, we will talk about the question many people wonder when it comes to printing Lego. Is it illegal to print Lego? The answer is no, you can print Lego parts as many as you can. But, it is illegal if you intend to sell them (with Lego’s trademark on them).

Although 3D printing technology has evolved so far. Still, the distance between the printed one and the real one is quite far away. We are talking about sturdiness, color, and precision. However, making your own Lego set will be quite fun and satisfying to admit.

There are countless reasons to three-dimension print Lego. As a result, here are some of the most noticeable reasons why you should try to print some.

1. The Cost:

First of all, making your own Lego set will more likely cost less than buying the authentic set from the store. Consequently, you will have to pay like 30 percent of the price on the materials. This means no marketing fee, branding fee, designing fee, and no more extra fee will be charged on your wallet.

3d Printing Lego Minifigures

Secondly, wasn’t there that time when you lost a tiny piece and spent a whole day looking for it? Those days are gone, you lost a piece of Lego? Lego Group forgot a small part in the pack you purchased (which sometimes happens)? You 3D print it in an instant. In other words, modern problems require modern solutions.

Thirdly, say, you are building a train with Legos but lack the train track? A 3D printed Lego train track will be got your back. Since it’s the most simple part if you compare it with other Lego parts. Consequently, you can easily print them with no hassle.

2. Custom Parts:

One of the most important things in making 3D printing Legos is you can print the shape you need. In other words, this is like a wish come true to many people out there struggling in creating their custom model. Similarly, you can also print them in custom colors or even revive the parts that Lego Group is no longer making.

3d printed lego parts

Printed Lego parts

More than that, you can design and 3D print your own legos if you are interested. Many dream of this and now it’s the present. Yet, you will need to do some homework about specifications. Standard block height, width, and stud placements of the original Legos are involved. Including doing the same thing on your newly designed block.

3. Making Your Own Legos Will Not Put Legos Out Of Business:

In case you felt bad about printing lego parts might affect Legos Group in a bad way. Well, don’t be, the idea of 3D printing parts had existed since the 3D printing technology itself had not developed. Even now they are a real thing now, making them will not cause the mighty Legos Group any harm. Shall we dig a bit deeper about this?

3d printer nozzle

Legos Group has a history of producing colored plastic bricks since the late 1940s. Plus, they have always pursued the idea that “only the best is good enough”. Also, they produce numerous parts through a highly evolved process of plastic injection molding.

On another side, while Legos built its reputation finely for years, 3D printing is still at its beginning. Massive 3D printers only began to be invented in the 1980s. Yet, they were extremely expensive and seriously limited in their abilities back then. Nowadays? They are still too far behind the real products.

3d Printing Legos Cost

In the future, say, 10 years, when the cost of 3D printing will be surely reduced. And the printing technology is improved. Then, the printed ones may stand beside the authentic ones in terms of quality. However, this is also assumed that the mighty Lego Group has not spent the last 10 years getting much better technologies. Also, adjusting costs and refining their production process are included. So just take it easy, have your fun and joy.

4. The Contrast:

The only downside of printing Lego by yourself is the time. Making a set of Lego will take lots of time and effort. Plus, the Lego bricks are a real legend for their perfect scale on every single piece. All authentic Lego parts will have to fit together with any other ones. Which had never changed for decades.

Noticeable Pieces Of Information To Start With 3D printer legos

3d printer model

Being said, printing Lego pieces can be the most creative, exciting, and enticing thing to do. Which makes your brain work as hard as it can (for a normal adult person). Yet, it can be extremely frustrating, especially when making a whole set of models.

Why? You may wonder. This process involves pre-processing, post-processing, and lots of Lego pieces to build even the tiniest, simplest Lego project. Hence, you will need proper preparation and knowledge for the most enjoyable experience. Also, less costly and frustrating!

1. The Materials:

3d Printing Lego Pieces

Since the authentic Lego bricks are made from injection-molded ABS plastics. This means it will be a highly recommended material for your Lego project. Which will offer your 3D printed Legos a fairly same feeling, sturdiness, and resilience to be compared with the authentic ones.

Besides the ABS, you will have another material to choose from, PLA plastics. This material is one of the most popular materials in almost every 3D printing project. It’s an alternative good choice for your printed Lego set. Although it lacks sturdiness and more likely will shatter itself if you step on it. The bright side is the pain in your foot will be reduced.

Honest time, how many of us had never stepped on a Lego piece? The pain it “offers” is like breaking a rib or rather have a broken rib than step on it. But for a similar feel? ABS is an excellent recommendation.

3d Print Lego Man

2. The Printers:

For a normal printing project, FFF 3D printers (fused filament fabrication)  will perform just fine. But talk about 3D printing lego bricks, injection-molding will be a good choice. Let’s put both of them in comparison.

FFF 3D printers will be suitable for large and classic Lego parts. The downside is it offers a low accuracy, some of your parts will get trouble with connecting and might be too loose or too tight. Which will take more effort to entirely replicating traditional Lego. Yet, it can be done, fairly.

3d printer machine

On the other side, injection-molded parts will deliver higher accuracy. This means it’s going to be a good choice for 3D printing Lego Minifigures. Hands or heads are included More than that, your printed Lego parts will be more likely to have a great fit on each other.

One more alternative way, SLA 3D printing (Stereolithography). This one delivers a great advantage when in a comparison with FFF 3D printing, the accuracy. The accuracy of this one is surprisingly similar to the injection-molded ones. There are some troubles you will have to face, the friction between parts. This makes the parts difficult to connect or to disconnect. Which will get your Lego parts to get loosed after times.

3d printer diy

Small tip, you will have the finest final results if you properly maintain and calibrate your printer. Furthermore, the key to the fitness of your printed Lego parts is the very first layer calibration. Notice that every micrometer plays a big role in your project.

3. The Slicer:

Commonly, a standard-setting of slicer will work just fine for most 3D printing lego parts. But, there will be always one “but”. Yet, not every printer can print the same volume. Even with the same model.

Is It Cheaper To 3d Print Legos

According to experts with various opinions and recommendations, you should start with the standard-setting of the slicer. Print a piece first, the size doesn’t matter. Then you will want to attach it to the original Lego piece to see how fit it is. If it fits right in the first attempt, then it’s going to be all good. If it doesn’t, try adjusting the nozzle.

Plus, the thinner the slicer layer you choose, the more time it takes to print. Furthermore, you will want to find the slicer settings that have good fits first. And then set it as default to print the rest of your project. Which may likely cost time at first but will reduce the printing time in total.

Can You 3D Print Legos Now? Tips In 3D Printing Legos

3d Print Lego Parts

Since some notable information about this article has been put on the table and the homework is done. It’s now the turn of some tips while making, after, and so on. So, shall we?

1. Choosing Materials:

As mentioned, each material offers a different price tag, quality, and functionality. When it comes up to printing Lego, the best and highly recommended choice is using ABS plastics. They offer a great sturdiness, resilience, and a similar feel to the authentic ones. But they can be a bit costly.

pla and abs comparison

PLA and ABS in comparison

There is an alternative option for you in case you don’t want to pay too much for 3D printed Legos, PLA plastics. Just like what we have learned above, this type of material is just like the ABS but the sturdiness. A good choice with less cost and more likely will prevent foot pain in any chance

2. FFF Or SLA?

Both of these two had advantages and disadvantages against each other. While SLA printing delivers a high accuracy process, suitable for 3D printing lego Minifigures and long-term usage parts. Which is the opposite of the FFF printing as mentioned above.

The similarity of these two is they can print quickly and requires post-processing. Which is a fun thing to do. Almost forgot! FFF printing is the one that can offer an affordable cost, not the SLA.

3. The Blueprints:

Recently, some stores sell properly developed 3d printing legos blueprints. Nor can you find them online, but this is quite risky because some may be designed in the wrong scales and dimensions.

3d printer lego man

A 3d print lego man blueprint

Or in case you want to challenge yourself by designing a blueprint yourself. You can skip this if you have already mastered the game. If not, you will need some careful research and studies. This may take time but trust me, it’s totally worth it.

4. Post-processing:

If your model requires stands or brims as support, you will have to remove them. And then sand them off to remove extra materials as giving it a smooth surface.

5. Troubles You May Face:

3d Print Your Own Legos

According to experts, there will be some challenges in your way to keep the game entertaining. Also, as earlier discussed, you will get some issues when attaching a newly printed one to the original one in the first few attempts.

Plus, you will want to adjust the nozzle to more precise specs to have a better fit on the original Lego brick.

Can You 3D Print Legos – Frequently Asked Questions

Can You Make Legos With a 3d Printer

1. Is 3D Printing Legos Legal?

If you scrolled past all the above, then yes, it’s legal to print Legos. However, as long as you don’t sell your printed Legos with the trademark on them, you are free from charge.

2. Is It Cheaper To 3D Print Legos?

There are two ways to talk about this. Assume that you already have a three-dimensional printer and are familiar with it. Then, the answer will be yes, it’s cheaper to print Legos. On the other hand, the answer will be a “no” if you don’t have a printer or don’t know how to operate it.

3D printing legos requires a proper and well-maintained three-dimension printer. Knowledge around 3D printing and so on. Also, a proper one may cost nearly over a thousand bucks while it can print only small parts. Therefore, purchasing a set of Legos at the same price sounds more financial.

3. Is 3D Printing Difficult To Learn?

Difficult? Instead of that, I would rather call it challenging. Because in case you are good at math or sculpting, or you can build Ikea furniture without instruction. Suddenly, it may not be that “difficult” to learn. However, if you have enough interest in it, your learning process is going to be an experience of joy and excitement.

Conclusion

Legos is and maybe always will be one of the most creative building sets of times. Hence, a special thanks to three-dimension printing technologies, we are now can supply ourselves with printed parts. So, if someone comes at you and asks “can you 3D print legos?” What would be your answer?

Further Reading: 

What Is 3D Printer Ink & The Following Knowledge

As you may or have not heard of them, three-dimensional printers are one of the keys for the future as innovative technology. The capacity to make almost anything. Yet they still need something as an input, this article will be all about “what is 3D printer ink”.

However, like every printer model out there. Even the most advanced one, does require materials, which we will discuss today – the 3 dimensions material inks.


Common Pieces Of Knowledge For A Good Start – 3D Printer Ink

1. 3D printer ink and normal printer inks, are they the same?

As you may be spotted the differences by the names, they are completely different, but how different are they? Shall we take a look at the homework?

What Are They Made Of?

They are materials received from multiple bacterias which deliver different functions. Offers many pieces of bacteria to enable the production of objects that have complex characteristics.

what is 3d printer ink made of

And The Normal Ones?

What Are Regular Inks Made Of? Usually based on oil ingredients such as soybean oil, linseed oil, or petroleum distillate oil (this one is extremely common). The colors may come from dyeing or other compounds.

2. The Printer’s Materials

Three-dimensional printers use a long list of different materials including resins, plastics, metals, or even ceramics, and many more. However, not all of it was easy to obtain for common and civil usages. It’s up to your government laws and policy. So, here are some common materials that you can use.

ABS Plastics:

A common thermoplastic polymer. Typically used for manufacturing almost anything or a part in many industries. Earned popularity for low cost, impact or chemical resistance, and so on.

PLA Plastics:

This one is one of the most popular printing materials since the beginning, it can be easily sanded or painted. While the ABS plastics may cause odor while processing, this one will not.

Epoxy Resins:

This material is usually derived from petroleum or plant sources and can be used as resins. Which offers a durable and lightweight final result. But the downside is a bit serious than the others. We will put it on the table later.

Nylons:

Also known as polyamide, this is one of the most talented three-dimensional materials on the commercial market. The final product can be extremely flexible, abrasion-resistant, dyeable, and the ability to be strengthened.

Powder Materials:

If something can be powdered, there will be a way to print it (copper, gold, iron, steel or ceramics, and so on). You can print any objects in any form, as long as it does not against the law. Some companies earned their success via printing houses and shelters lately.

What Cannot Be 3d Printed

3. Is 3D Printing Illegal And What Can’t You Print?

Nowadays, with just-right amounts of money, you can have your 3D printer and have a good time with them. Still, there are some specific things that you are not allowed to print or make by yourself. You will be liable for what you print.

According to the US demands, there are such things you can not print without permission. Why so serious? Here is a list of what cannot be 3D printed (may be changed).

Assault Weapons:

For nearly a hundred years, weaponry manufacturing has been a backyard of the arms industry, big fish like Glock, Remington, or Sig Sauer, and so on. Furthermore, making an assault weapon from scratch at your home requires millions of dollars worth of mechanical equipment. Years of engineering as designing mastery will be involved.

assault rifle blueprint

A piece of an assault weapon blueprint

However, in recent years, things have changed. With just a printer, a proper ink material, and a blueprint, which can be downloaded online. You can easily make one of your own without any hassle. It can be plastic, metal, gold, copper, or even ceramics.

Because of being made outside authorized supply chains and requires no background check. Which means they are invisible to law enforcement agencies. Especially ceramic weapons, they are a real threat accordingly. Therefore they are extremely dangerous and banning them is a must.

Drugs:

3d printed drugs

There is a fact that you don’t need the best 3D printer ink to produce illegal drugs and sell them, crime organizations know that too. This drug printing would be surprisingly valued for crimes and could be easily exploited. Consequently, can put the whole economy and the people at the edge of ruins.

Noticing the dark side of illegal drug printing. Many law agencies and governments in the world have decided to forbid them for goods.

Fake Products:

One more thing that threatens the economy and civilization’s wealth, the fake or scam items industry. Long before the inks and the printers were made, fake items manufacturers have been a threat to almost every honest company.

nike air printed shoes

A printed Nike air sneaker

Nowadays, with three-dimensional printers, counterfeit manufacturers, or may I say “criminals”. Able to easily make dozens of copies. Harming even the consumers and the true producer. Many true businesses have gone bankrupt for this.

Bionic Printing:

Bioprinting includes making body parts such as arms, legs, or even orgasm, and so on. This type usually requires an expensive 3D printer bio-ink. This type is like an open door for our future Which allows disabilities or veterans to have a simpler life.

But aren’t those companies making that mainstream? You may wonder. Yes, you can print these. However, you can only be allowed to print in an authorized research lab. More than that, you will need years of studying as designing to work in it. Or maybe simpler, you can throw dozens of bags of cash and you will be the owner. You decide what you want.

3d printed bionic hand

Virus Printing:

Just like bioprinting, this process requires some of the best three-dimension bio-ink and years of studying. Therefore, this form of printing can improve the accuracy of DNA reproduction. Which is helpful for the community. Yet you still need an authorized developed lab to make it.

Other Obvious Things:

Last but not least, you can’t just print access cards or keys with no permission from the authorized agencies. Like being mentioned above, crime organizations will notice and exploit this so easily. Consequently, forbidding them in printing as objects is a must.

4. 3D Printer Ink Price

Just like almost every commercial product out there on the market. The overall quality plays a big role in affecting the price. However, the most expensive one does not mean it will offer a better final result. Choosing the right material will cost less yet more fun.

The list above is listed based on their properties and prices from the most affordable and opposite materials.

How Expensive Is Ink?

What Is Printer Ink Made Of

Being said, the materials that you choose to work with are not equal. Hence, the cost will not be the same. Either If your project requires just regular printing materials. PLA or ABS for example. Then, the cost would be more likely affordable.

In case you want to leap of faith with special inks. Then they can be a bit costly. Usually, three or four times higher price tags are commonly acceptable. Keep in mind that the price pretty much depends on the government’s policy or laws (both of selling nor buying).

Signs That You Need A Better Ink

In case that you already have the ink you need. Yet it just does not give a satisfying final result or just bad in some cases. There are some things that you should pay attention to.

1. The Final Product:

Using cheap materials may play a big role in giving the final product a neat-looking structure. Consequently, if you have a rough-looking and unstable structure final result, consider renewing it with a better one.

2. The Processing:

abs vs pla plastic

Some cheap materials may produce a bad odor while processing, especially on ABS or PLA plastic materials. It’s completely fine if the uninhabitable smell is not a big deal to you. Though you will need to find a better material with less odor and good compounds to spend time with.

Tips For Getting The Best One

Since we have learned a bit about what is 3d printer ink and the following knowledge It’s time to find out how to find the most reliable material for each of your projects. Notice that they are based on every single need and requirement.

1. The Brand:

Each brand has its reputation based on many perspectives such as material quality, after-sell service, or delivery services. Untrusted delivery service may damage your ink as soon as they touch it. A well-known brand will make sure that the trust you gave is worthy, in every aspect.

However, the branding does affect the price tags, more or less. A material brand with less popularity may offer its products with a lower price tag. Which makes your final result more likely to cost less. Yet the downside is you may not have the best final result as you could have.

3d printer ink material

2. The Materials:

As mentioned above, there is plenty of material for you to choose from. Getting the right one to work with is like releasing a weight on your back. You will probably don’t want to print a hand with ceramics. Though, if you like it to be that way, then it’s all good. At the end of the day, it’s all up to you.

3. Delivery Service:

After choosing a brand to trust and the right materials, there is one more thing you should take a moment to consider. The delivery service, which many of us seem to forget most of the time.

Shipping 3D ink material is not an easy nor difficult task. Yet because of the well-known recklessness of some famous delivery services. Which might get the goods damaged while delivering and ruin the whole project. So, choosing a reliable delivery service will more likely release you from that burden.

What Is 3D Printer Ink – Frequently Asked Questions

How Much Does 3d Printer Ink Cost

1. How Expensive Is 3 Dimensions Ink?

As being said, the price tags will be affected more or less by many things. The manufacturer, delivery service, what kind of ink you want. The recent laws of three dimensions printing are involved.

However, the expensive price tag does not mean it will be the most suitable. If you can afford it without emptying your pocket and your project needs it, then it’s the fittest for you.

2. Is There A Printer That Doesn’t Need Ink? For now?

No, every mechanical device needs at least one thing to work. A printer that asks no ink or material to operate is just difficult to imagine. Though, possibly in the future, someone will make one.

3. Can You 3D Print Edible Food?

food 3d printer

It may sound like a sci-fi movie but it’s a solid thing presently. You can print edible food for real now. The taste you are worried about will be the same, even at a healthier level! Especially desserts like chocolate cakes or creams.

3D printed pizza and candy:

This is our whole new future and helps in decreasing animal butchering and might be a solution for world hunger. Even vegans may feel good about this, at least that’s what I think!

4. How Dangerous Is Resin 3D Printing?

You may not notice when the first time resins made contact with your skin. Though, after a long time, your skin will be decreased on resin-resistant exposure. Which leads to several health hazards such as skin burns and blisters.

how to use resins

A typical blister, consequences of working with resins with no protection

You can prevent this if you follow a strict rule list of safety while working with resins. Such as wear gloves while working with it, have a mask on, and wash your hand instantly if contact with resins had happened. Your health will be all fine then. Remember that anything can cause you ill these days, safer is better.

A Few Last Words

Hopefully, after scrolling through all of this, you will have the answer for yourself. Having fun and creative time with your beloved printer. So, what is 3d printer ink? You probably already have the answer to this question in your mind.

Further Reading: 

Best 3d Printer For Board Games in 2021

Best 3d Printer For Board Games

Are you a technology geek and also enjoy playing board games with your friends? Have you ever thought about finding the best 3D printer for board games so you can just print any game you want? 3D printers come in a variety of types and forms, with different price ranges, from affordable to expensive ones.

The number of printers on the market today can make it difficult to make a good decision. Since that, we have put together a list of guidelines and our product suggestions for you to find the best 3D printer for tabletop games.

The Top-Rated 3d Printer For Board Games (Recommendations)

#1. DREMEL DIGILAB 3D20 – TOP PICK

#2. FLASHFORGE 3D PRINTER CREATOR PRO– WORTH THE PRICE

#3. LULZBOT MINI 2 DESKTOP 3D PRINTER– BEST FOR NEWBIE

#4. CREALITY 3D CR-10S PRO V2– EXCELENT FFF PRINTER

#5. MONOPRICE SELECT MINI 3D PRINTER V2– BEST BUDGET

#6. ELEGOO MARS PRO MONO MSLA 3D PRINTER

#7. ANYCUBIC PHOTON MONO


How To Print A Game?

3d Print For Board Games

A game can be printed in both two ways. If you want to use an existing game, you can find its 3D design files on a design website and download them to get started. You can also find their directions around the Internet.

Are you making a new game? Then you will have to put in a lot of time and effort. If it is a strategic game, you will need to carefully design and 3D print the board game pieces, as well as the board. It ensures that everything fits together and makes sense. If you are making a fantasy game, you can let your imagination run wild by creating stunning landscapes and characters.

There are some printing tips for you:

  • Read the instructions before printing:

This is how you evaluate whether or not a game is worth printing. It is typical for 3D printed games to have complicated rules, making them difficult to play. You will get a feel for the game by skimming through it quickly. If you have concerns about the rules, many game designers in this space are open to suggestions, and you can typically clear up any questions with a short email.

  • Look for games that contain pictures of real prints:

3d Print Board Game Accessories

This is not unusual advice for people who want to print something, but it is especially true for 3D printable games. You can be fairly confident that someone has played a game if you can tell it has been printed. Try to reach out to people who have made it and ask them what they think about it on platforms like Thingiverse.

  • Look for beta versions:

There are many beta versions of tabletop games on the Internet. However, they are not very well marked. Why not take a look at these versions to know what needs to be improved for your copy?

  • Color your games:

This is entirely optional. In many cases, a colorful effect can be achieved using a variety of filaments. A little bit of color, in our opinion, goes a long way.

3D Print Board Game Accessories

3d Printer For Tabletop Games

Along with making your own games, if you have a set of board games and one or more pieces are missing, you can easily 3D print the missing pieces to complete your set. You can print die, cardholders, token holders, and other game-specific items for simpler games. You can also get 3D models of your characters, their accessories (armor and weapons), as well as complete environments, for more complex games. Of course, you may have to repaint the whole thing.

There is one caveat, though: make sure to check the licenses for some of the games, as some of them prohibit you from making an own copy. So stay out of trouble and double-check all the relevant details with the blueprint files once you have downloaded them.

Some Board Games You Can 3D Print

1. Words Of Wisdom

In the game Words of Wisdom, players must spell words in order to create a route for their character to enter the Mountain and achieve his big reward.

The game is entirely 3D printable, print qualities are mentioned in the instructions.

Find at: Pineshape

Words Of Wisdom

Source: All3DP

2. Tetris

Tetris, along with Pacman and Snake, was the first computer game and one of the first games for cellphones. With a 3D printable edition, you can now play it in real life. A fun game for kids to practice their motor skills or for adults to remember about their childhood.

Find at: MyMiniFactory

Tetris

Source: All3DP

3. Pokemon Go Board Game

Pokemon Go was a worldwide phenomenon. Thus, it is a good way to make it into a physical board game. The idea is a hunting game that is based on the classic game Fox and Geese.

Find at: PinShape

Pokemon Go Board Game

Source: All3DP

4. Seven Stones

This is the Star Wars version of the turn-based game Seven Stones, which tells stories around the magical number 7. This game has been more than a digit throughout history and many cultures and religions. The aim is to have more colors or symbols than your opponent by the end of the game or to carry all seven towers of a sign to his side to automatically end the game.

Find at: Thingiverse

Seven Stones

Source: All3DP

 

5. Hive

Hive is a board game that can be 3D printed. The objective is to use strategic tactics to encircle the other player’s queen bee and capture and take over her hive. Similar to chess, each bug is given various maneuvers, but since there is no underlying board, the “board” is constantly moving and changing.

Find at: Thingiverse

Hive

Source: All3DP

Best 3D Printer For Board Games Shortlist

Product imagesProduct namesEditor's ratingPrice
DREMEL DIGILAB 3D204.5Check
Price
FLASHFORGE 3D PRINTER CREATOR PRO4.2Check
Price
LULZBOT MINI 2 DESKTOP 3D PRINTER3.8Check
Price
CREALITY 3D CR-10S PRO V24.2Check
Price
MONOPRICE SELECT MINI 3D PRINTER V24.0
Check
Price
ELEGOO MARS PRO MONO MSLA 3D PRINTER4.5Check
Price
ANYCUBIC PHOTON MONO4.4Check
Price

*Ratings are from Amazon at the time of publication and can change

Best 3D Printer For Board Games: Choose Your Suitable One

Best 3d Printer For Tabletop Games

#1. DREMEL DIGILAB 3D20 – TOP PICK

See Latest Price

Key features:

  • Pre-assembled printer
  • Fully enclosed
  • Full-color LCD touch screen
  • PLA filament only

The Dremel Digilab 3D20 is not the most affordable printer on the market, since it costs around $600. However, it has one of the best prices for a printer in its class. We consider it a good buy because of its long-lasting build and useful features. This price is not too much for new 3D printing enthusiasts seeking to gain their first hands-on experience. The best part is that you get high-quality models for a printer that is, in our opinion, fairly priced.

The product comes as a fully assembled package. The advantage is that you get consistent quality control while also saving time figuring out the settings. It also has a closed architecture. Furthermore, the bright LCD touch screen makes it even more pleasant to use.

Nevertheless, the printer becomes a little noisy while working. It sounds almost like a microwave.

Pros:

  • Good price offered
  • Easy to use
  • Fully assembled
  • Good quality prints
  • The easy bed leveling process

Cons:

  • The software is no longer supported or being developed
  • Only support printing from SD card, no external connectivity

Dremel Digilab 3D20 unboxing and review:

#2. FLASHFORGE 3D PRINTER CREATOR PRO– WORTH THE PRICE

See Latest Price

Key features:

  • Sturdy metal frame
  • Aviation level aluminum plate
  • Capable with a lot of filament types (PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP)

The FlashForge Creator Pro stands out from the crowd because it is the best 3D printer for board games with dual extruders, allowing for dual-color printing. Furthermore, we discovered that this model had fewer bed adhesion problems than many others. Unfortunately, the print quality was not as good as expected, and the program suggested was ineffective, too.

In general, this machine is simple to use and has a lot of potentials. Due to the setup process and manual filament adjustments and bed leveling, it is not the most solution available, but buyers should not be afraid of little tinkering and troubleshooting.

Pros:

  • The enclosed chamber insulates and protects prints
  • Support a variety of filaments

Cons:

  • Bad customer service
  • Print heads get clogged easily

FlashForge Creator Pro review:

#3. LULZBOT MINI 2 DESKTOP 3D PRINTER– BEST FOR NEWBIE

See Latest Price

Key features:

  • Maximum print size: 160 x 160 x 180 mm
  • Tool head: E3D Titan Aero with 50mm nozzle
  • Maximum temperature: 290 oC
  • Heat print bed: Borosilicate glass with maximum temperature: 120 oC
  • Print volume: 281.4 inches

LuzBot Mini is a high-performance 3D printer for board games, perfect to use on desktops at home. It comes fully assembled and can be set up and ready to use in minutes after opening the box. It has a lot of features that make it easy for new users to get their designs printed. For example, the auto-leveling bed adjusts itself during the printing process to print the design as required, with no need for human involvement.

LuzBot Mini has Open Source Hardware, which means that it was created as a result of a group of professionals working together. Allowing you to get started with 3D printing right away, even though you have no previous experience. With some little adjustments, you can use a wide range of filaments. The Mini is ideal for board games because it accurately prints all of your designs in fine detail. Although the platform appears to be thin, it is still ideal for personal use.

Pros:

  • Reversible glass heated print bed
  • Quiet operation
  • Self-cleaning, self-leveling technology
  • Fully assembled

Cons:

  • Hard to put the SD cards in
  • Printing quality does not meet the expectation

LulzBot Mini 2 overview and features:

#4. CREALITY 3D CR-10S PRO V2– EXCELENT FFF PRINTER

See Latest Price

Key features:

  • BL Touch auto-leveling
  • Upgraded silent motherboard
  • 500W Meanwell power supply
  • High-quality extrusion mechanism
  • PTFE tube with high temperature resistant

Creality 3D CR-10S Pro V2 is our top suggestion for those trying to the most bang for their buck when it comes to the best 3D printer for board games. It will surprise you with extremely high-quality prints as an FFF printer. Moreover, it is super easy to operate as well. It has a large build envelope and is a capable machine in general. Thus, this is a good option if you need to 3D print board game components.

What makes it suitable to print tabletop games is its large build volume measuring 300 x 300 x 400 mm. You can use any 1.75 mm filament that does not need a temperature higher than 160 cC.

Pros:

  • Compact form factor
  • Easy to use
  • 2 connectivity options: USB cable or microSD card
  • Large build volume

Cons:

  • Support center could be better
  • A little bit more assembly than other printers

Creality CR-10S Pro V2 unboxing and review:

#5. MONOPRICE SELECT MINI 3D PRINTER V2– BEST BUDGET

See Latest Price

Key features:

  • Support for all filament types
  • Compact desktop design
  • Filament diameter: 1.75 mm
  • Heated aluminum build plate nozzle with cooling fan for printing

For the price, Monoprice Select Mini 3D Printer V2 is very impressive. For the features, it has a heated print bed, is very convenient to use, and produces clear and accurate prints. Once it is up and running, this is a fantastic little machine with a lot of functionality. It performs as expected in most cases, and the quality of the modes we tested far exceeded our expectations.

Of course, with that price, you cannot expect it to be perfect. Variable temperatures when the hot end is in use cause a strange anomaly, and it appears to malfunction while printing at high speeds. Monoprice’s calibration procedure is a disadvantage, too. And the AC power brick that came with it died after just 12 hours.

Pros:

  • Fully assembled
  • All filaments supported
  • Has WiFi connection
  • Affordable option

Cons:

  • Low-speed print
  • Hard to calibrate
  • Unprotected build plate
  • The inconsistent hot end temperature

Monoprice Select Mini 3D Printer V2 unboxing and testing:

#6. ELEGOO MARS PRO MONO MSLA 3D PRINTER

See Latest Price

Key features:

  • Fast printing, longer lifespan, and stable performance
  • Ultra accuracy printing
  • Sturdy build quality
  • Provide a safer experience with a silicone rubber seal for the cover top
  • 1-year warranty

The Elegoo Mars Pro is simple to set up and operate, and it produces high-quality prints. All is ready to use straight out of the box, so you can focus on slicing files for printing rather than fiddling with hardware settings. This is one of the most cost-effective UV curing SLA printers available, comparable to the other products in its class. Although resin printers have a smaller build area than the other printers, for many customers, the quality tradeoff is worthy.

The consistency of the print is mostly influenced by the file settings. It may take some time to deal with the setting that produces smooth and accurate prints with this printer. The type of resin you use, the exposure time, and the adjustments you work in all have an effect on the final print.

Pros:

  • Valuable for money
  • New vats hold more resin
  • Free MSLA printing

Cons:

  • The silicone does not fit well
  • Quite loud operating
  • Z-axis tricky lubricated

Elegoo Mars Pro unboxing and how to setup:

#7. ANYCUBIC PHOTON MONO

See Latest Price

Key features:

  • Has LCD screen
  • 5X faster than the regular printers
  • Transparent cover blocks up UV rays and reduces wasting of resin
  • 1-month free return, 1-year warranty

The metal body is one of our favorite features of the Anycubic Photon line. Although the yellow UV-covered screens are supposed to be translucent, we like keeping them with the protective cover on because it makes the printer feel more premium. It enhances the appearance of the printer while providing full protection. The Mono one has a good feel of power and that solidity aids in the production of excellent detail in the prints. The build platform is kept secure by the dual linear rails and lead screw, and the bed has a leveling mechanism that holds it locked in a place print after print.

Pros:

  • Faster printing
  • Full metal body
  • Support WiFi connection
  • Decent performance

Cons:

  • High price for newbie
  • Bad software

Anycubic Photon unboxing and testing review:

Factors Need To Be Considered Before Choosing Your Best 3D Printer For Board Games:

1. Legality

In fact, 3D printing is a hobby that is appropriate as long as it only used for personal purposes. It should not be used to avoid your duty to pay others for their creative effort, ability, and hard work. Furthermore, if an artist or organization who owns an image, sculpt, or artistic work makes a claim against the sharing of a visually similar product, both digital or physical, even if it is not for profit, the claim should be respected by the original artist. It is immoral and possibly illegal to use a 3D printed copy for profit.

Thus, check carefully if the game you are going to print is allowed for copyright or not. Some games are available for free download on the Internet. However, some require to be paid before downloading.

2. Precision

When it comes to 3D printing board game figures, precision is perhaps the most important feature of a printer. This figure, which is measured in millimeters, determines how small the details in a print can be.

3d Printer Board Game Pieces

3. Technology

Technology is also a key factor. There are many types of printers on the market nowadays with different features, such as SLA (stereolithography), DLP (digital light processing), FDM/FFF (fused deposition modeling), etc. Moreover, you have to make some researches about the additional features or enhancements that may enhance your 3D printing experience.

4. Build size

Although the build size is not a major factor when choosing the best 3D printer for board games, it is good to have the option for printing larger models if necessary. As a result, we can look at how big of a printer can print to make the final decision.

5. Ease of use

The ease of use of a 3D printer will dictate how much work you will have to put into your model to get it up to your standard.

6. Price

Last but not least, the price point is a key factor to consider. Since not all printers are affordable to everybody, we can compare what each product has to give in the other 5 categories to their price point to see whether you are getting a good deal or actually overpaying.

Best 3D Printer For Board Games: Frequently Asked Questions

Best 3d Printer For Board Game Pieces

1. Should I Buy A 3D Printer For Tabletop Games?

Definitely yes. Masters can craft the entire landscape to picture-perfect detail using 3D printers, from the base tiles to character units to complete landscapes. 3D printing can be a very useful tool for people who do not want to spend time crafting the details for their games and instead want to get right into the action. On the Internet, you can find a plethora of blueprint files containing a complete set of instructions for these games.

2. How Much Does It Cost If I Use 3D Print For Board Games?

Our response has always been “it depends” because there are a variety of factors that influence the cost of 3D printing. Based on these factors, the cost of your process could range anywhere from $3 to $1000 or even more.

3d Printer For Board Games

3. What 3D printing material is the most durable?

It’s polycarbonate. Polycarbonate is a type of plastic. It Is the undisputed king of desktop 3D printing materials. The strength of polycarbonate amazed us as well. Its tensile strength of 9800 psi, compared to nylon’s 7000 psi, makes it the perfect material for high strength, functional components.

4. What Is The Toughest Material For 3D Printing?

ABS, TPU, PET-G, PA, PAHT CF15, PP, and PP GF30 are the most durable 3D printing materials. These filaments’ strength varies, with some being more impact resistant and others being structurally solid or even fatigue resistant. Before using, look carefully at the differences between each filament.

5. Is It Possible To 3D print carbon fiber?

Best 3d Printer For Tabletop Games

In the case of carbon fiber, the fibers increase the part’s strength, stiffness, and dimensional stability, allowing it to outperform its base plastic counterpart. Chopped carbon fiber 3D printing materials can be used in the same way as regular 3D printing plastics, with the added benefit of improving certain material properties.

Conclusion

Since 3D printers are both inexpensive and dependable. They are a great option for hobbyists looking to have their own copies of board games or add some unique elements.

If you are a newbie in 3D printing and just want to print small projects such as board games, we suggest you choose the DREMEL DIGILAB 3D20. It is affordable but still offers enough features to give you a decent printing experience. ANYCUBIC PHOTON MONO is a new face on the market but has already gained some good comments from either hobbyists and experts. Thus, you can give it a try.

The best 3D printer for board games has a lot of factors that need to be considered before buying. We hope thanks to our article, the picking task is now easier for you.

Further Reading:

PLA vs ABS vs PETG vs TPU vs NYLON? What Is The Difference?

Pla Vs Abs Vs Petg Vs Tpu

3D printing technology has appeared for a long time, along with the various raw materials you can use to work on. Let’s focus on Pla Vs Abs Vs Petg Vs Tpu Vs Nylon debate to pinpoint the best materials!

It’s time to join me to discover and find out properly about five 3D filaments which are super popular that can meet your creative demands.


Short Brief of PLA, ABS, PETG, TPU, and Nylon

PLA/ Poly Lactic Acid is used popularly in 3D printing. This most common 3D filament is environmentally friendly with a low heating temp.

It is produced from renewable resources such as corn starch or sugar cane.

PLA filament is easy for printing, so it is ideal for newbies.

ABS/ Acrylonitrile Butadiene Styrene is in the second position of the popular list for 3D printing material just after PLA.

This filament exhibits high strength, flexibility, and resistance.

It is used widely for toys, the housing of electronics, gears, smartphones sleeves, etc.

PETG/ Polyethylene Terephthalate Glycol-modified is also the most common plastic in the market, famous as the polymer used in bottles, food containers, and clothing fibers.

For more visual information on PLA vs ABS vs PETG, check this video!

Nylon is used in many industrial applications in 3D printing. Especially, Nylon is one of the perfect materials for strength, flexibility, and durability.

TPU/ Thermoplastic Elastomers – flexible plastic which comes with rubber-like quality.

I can say that TPU is incredibly durable. It is always used in medical supplies, household appliances, and automotive parts.

Firstly, please take a quick look at the five materials’ main features to see how different they are.

PLA vs ABS vs Petg vs TPU vs Nylon comparison chart:

Name PLA ABS PETG TPU Nylon
Printing temperature 180-230°C 210-250°C 200-260°C 190-245°C 220-230°C
Printing bed temperature 20-60°C 80-110°C 80-90°C 60-90°C 70-100°C
Printing bed Optional Necessary Optional Optional Necessary
Bed Adhesion Medium Medium Bad (use blue tape/PEI) Bad (use blue tape/PEI)
Fumes Few to none Harmful Harmful Few to none Few to none
Absorption of moisture
Strength Medium Good Very good Very good Good
Flexibility Bad Medium Good Perfect Good
Heat Resistance Bad Medium Good Good Bad
UV resistance Medium Medium Medium Good Good
Water Resistance Medium Medium Good Good Medium
Biodegradable Partly
Recyclable
Gluing and Painting Possible Possible Possible Possible Possible
Acetone Treatment Not possible Possible Not Possible Possible Possible
Colors Large selection Large selection Large selection Large selection Large selection

Now, let’s learn more about each material’s specific features to know in detail and determine what will be the right one for your needs.

Pla Vs Abs Vs Petg Strength

PLA vs ABS vs Petg vs TPU vs Nylon Strength

Strength will be the most important thing to mention for 3D printing materials.

For PLA, the tensile strength is very high, it is not easy to warp, so this material is suitable for prototyping application.

The tensile strength of ABS is just lower than PLA only, and it’s still very high. ABS filament is a sturdy structural and pretty flexible material.

The exact usage of PLA is excellent for prototyping applications.

PETG strength is high enough to make it an excellent material for impact resistance.

Nylon strength is considered high, and it is also flexible to make it the perfect material for making structural parts.

TPU strength seems to be short compared to the four other materials.

However, it is mainly used as an additive for strengthening materials.

Durability

Thanks to the brittle properties, PLA is not as durable nor impact resistant compared to other materials.

In contrast, ABS is very durable and also impact and chemical resistant.

PETG is in the middle of PLA and ABS durability. This filament is not as brittle as PLA.

However, it can be scratched simply in comparison with ABS. Primarily, it is significantly more flexible than the others above.

Nylon makes for exceptional durability with a high melting point.

Additionally, it is also very resistant to abrasion.

TPU is super durable. It is resistant to abrasion, chemicals and also withstand impacts.

Flexibility

PLA is brittle. Hence, it is the least flexible filament compared to the four others.

ABS is just moderately flexible. It is the same as PLA; ABS is the thermoplastic that turns into a moldable and soft state when it is heated.

PETG is more flexible than the ABS and PLA. However, it is a little bit softer.

Nylon is a flexible and versatile material, and it makes these filaments tough to break.

TPU is the king of elasticity, and this material is famous for being easily stretched and bent without compromising the design, durability, and strength.

PLA vs ABS vs Petg vs TPU vs Nylon Easy Printing

PLA comes with low printing temperature, excellent bed adhesion, and a glossy finish. It has some wrap in printing.

Hence, PLA is ideal for 3D printing starters.

ABS has an odor during printing time, and it is easy to wrap.

To get ABS print quality, you need a heated print bed and Kapton tape.

PETG features the same printing setting as the ABS. In contrast, layer adhesion of PETG will be better than ABS.

Nylon filament is one of the hardest things among five printing materials.

Besides, it has high shrinkage. For nylon prin, the heated chamber and bed are super essential. Because nylon has high water absorption, the storage of filament is essential too.

TPU is easy to print, with good layer adhesion and low shrinkage.

Usage

PLA is the top contender as the most popular filament in the market.

Especially, it comes with bright neon color schemes, ideal for concept models, architectural mock-ups, and prototyping.

ABS – the second popular 3D filament, it is very durable and has strong heat resistance.

It is suitable for building legos, but it is also found in household tools and goods.

PETG is standing out when I mention its resistance, flexibility, and well-rounded strength.

This filament is helpful for some functional objects, such as mechanical parts.

Nylon also features a well-rounded balance of durability, flexibility, and strength.

Thus, it is perfect for mechanical parts, functioning prototypes, and creative tools.

TPU is the most suitable for creating objects needed to take a lot of wear.

It is an excellent material for toys, accessories, and phone cases.

PLA vs ABS vs Petg vs TPU vs Nylon Heat Resistance

PLA has a low heat resistance compared to other filaments.

Hence, it is susceptible to heat.

ABS is not as heat resistant as others because the thermoplastic properties make it malleable at a high temp.

PETG is properly heat resistant and durable.

ABS vs PETG, ABS features the harder structure, and it is more rigid. PETG is about 20% denser than the ABS, so it does not wrap quickly as the ABS.

Nylon lacks strength and structure.

It is durable and has a more robust impact resistance compared to ABS.

Safety

PLA is the same as plastics which are potent with chemicals that can be toxic when inhaled from the processing’s emissions.

However, I am sure that the proper ventilation and safety protocols can handle all.

The bright coloring of the material will indicate the additive, which is not safe. Hence, you should remember it.

ABS is the same as PLA, which can be toxic when it is in liquid or vapor form during the processing.

The fumes release the smell that can cause nose and throat irritation. However, the finished material is not a health hazard.

ABS is the building block of lego and household material. It is very durable, and it can be heat resistant to break it down quickly.

PETG also causes carbon emission during the processing. It is not closed as a health hazard as the ABS.

It does not come with an unpleasant smell from emissions, but its fumes can also cause nose and throat irritation.

The experts already confirmed that this material would not pose any serious health risk.

Nylon emits VOC, which is toxic when inhaled and also presents some damage to your respiratory system.

However, the chamber, well-ventilated room, and the safety protocols will lessen the potential health risks for these materials.

TPU is a plastic with high durability and safety to use.

However, as with the materials mentioned above, health risks can still be a big problem if the materials can not be handled perfectly or there are no safety protocols during the processing.

PLA vs ABS vs Petg vs TPU vs Nylon Price

PLA is the most affordable investment that is the reason why it is so prevalent in FDM printers.

It usually costs under $20/kg.

ABS is also widely used for 3D printing, which helps some particular models where the temp resistance and strength are essential. It also costs around $15 to $20/kg.

PETG is the alternative to ABS. This material is robust, durable, and easy to use.

It takes around $ 16 to $ 19/ kg.

Nylon is an excellent material for flexibility and chemical resistance which is perfect for fears and bolts.

Thus, its price is higher compared to PLA, ABS, or PETG.

TPU is a rigid, flexible, and strong material for 3D prints.

Its price is the highest among five from $87 to $100/ kg.

Accuracy

The accuracy of FDM printed components depends on the printer calibration.

The PLA material features a superior dimensional accuracy.

It has a lower printing temperature, making it easy to get susceptible to warping when it gets cooled.

ABS is the same as PLA with dimensionally accurate and trusted to use for strength and flexibility.

The material is more susceptible to warping compared to the PLA features lower printing temp.

PETG is very durable and flexible for making models.

The dimensional accuracy is top-notch, which makes it excellent for producing quality models.

Nylon is also incredibly durable and flexible, and it is highly hygroscopic.

Any exposure to the high humidity can affect the build of filament, which leads to inconsistency in the dimensional accuracy and its part strength.

TPU is similar to Nylon. It is flexible, but TPU has the added drawbacks in achieving accurate dimensional parts.

Besides, the malleability filament makes it softer than ABS and PLA.

PLA vs ABS vs Petg vs TPU vs Nylon Finished Surface and Post-processing

PLA requires sanding. Using many grip sandpaper will do the trick in smoothing out the surface.

It is not complicated to do, and you can cover the surface with liquid polish if you want to see a shiny layer.

ABS materials use acetone to smooth. The process will eliminate the visible lines and roughness to its layer and provide a clean and smooth finish.

It is also a good way of smoothing out for reaching the places in a 3D model.

PETG requires the combination of priming, coating, dissolving, and sanding.

It is the same as the combination of post processes in ABS and PLA. While dissolving parts is unnecessary, it is an effective way to smooth out hard to reach the place.

Nylon – while the hygroscopic of Nylon features drawbacks when it comes to warping after printing, this Nylon makes it easier to post-process because it can absorb spray paints and the fabric dyes.

TPU, with excellent elasticity and rubber light material, makes cleaning and smoothing the surface finish hard to achieve.

You can laser ablation is the perfect solution in diminishing the surface of roughness. The laser heat melt surfaces peak and provides the material a smooth finish.

1. PLA vs ABS vs PETG

Pla Vs Abs Vs Petg

ABS and PLA are the most common filaments for 3D printing technology.

These materials are thermoplastics, and they can be shaped in the hot state and can retain the shape after getting cool. Mainly, these materials also have many differences that you should find out.

Firstly, PLA is an excellent choice for every kind of 3D printings which doesn’t come with high strength, while ABS features higher strength.

Secondly, PLA is recommended for three-dimensional printing, which does not need a unique surface finish.

The prints made from they are less durable than the ABS. Thus, it is not recommended for printing parts that are to be bent. ABS is suitable for flexible three-dimensional prints.

Besides, it is not highly heat resistant, and you should not use it for 3D printings exposed to direct sunlight or some component connected to the heating device.

In contrast, ABS features high heat resistance.

PETG is a printing subset of polyethylene, which is cross between stronger than ABS and more heat resistant than PLA.

Moreover, it is not robust enough for all kinds of manufacturing environments.

What is stronger PLA or PETG? I can say that PETG is stronger in the tensile strength.

It is also more durable, flexible, and impact resistant.

Besides, the UV and heat resistance of PETG is better than PLA for outdoor usage.

What is the best PETG filament? (PLA vs ABS vs PETG vs TPU vs Nylon)?

Each material will own its perks.

Choosing the best and suitable materials will depend on your purposes of printing. PLA still is the most common for 3D printing.

It is friendly to use, with a low temp for making printing more accessible.

Thus, you can use it for different applications.

In addition, it comes with a wide range of colors that make it perfect for your creative needs.

2. Petg vs Nylon

Petg and Nylon are both common and strong filaments on the market, and it might be a big challenge for choosing between these materials.

These are the most excellent filaments for various uses.

Nylon is strong and flexible.

However, moisture intolerant, while PETG is chemically resistant, is easy to use and cheaper than Nylon.

Only it is low on durability.

Hence, if you need easy-to-use and chemical-resistant produce, PETG is the best choice if wear and tear is your big deal.

Petg vs Nylon Strength

PETG has a slight advantage at 50 MPa vs Nylon, ranging from 40-45 MPa.

However, there are high-strength versions for PETG and Nylon for increased tensile strength. It is possible to have strength Nylon which is stronger than PETG.

FAQs

1. What is the difference between PLA and PETG?

There are many differences between PLA and PETG. First, about the price, PETG is more expensive than PLA, while PLA features a wider range of colors.

It is easier for 3D print than PETG since it is more forgiving when coming to settings.

These materials come with minor shrinkage during cooling time, and these are foods; however, the small gaps between layers can cause some bacteria.

Moreover, these are friendly to users, Petg is stronger and more durable.

Besides, it is also more heat resistant.

2. What is better for 3d printing PLA or ABS?

PLA is perfect for 3D prints since its lower printing temp, which is easier for printing with, and it will be suitable for parts with fine detail.

ABS is ideal for applicants where flexibility, thermal stability, and strength are needed.

3. Can PETG be used outside?

Pete is a super tough material with outstanding thermal resistance, which uses universal, but it is suitable for mechanical parts both indoor and outdoor.

You can print large objects without any problems because it has no warping.

4. What temperature can PETG withstand?

Pete is suitable at a temperature of 90 to 110 degrees C. In this temperature range, dimensional and warping changes are significant.

5. Is Nylon stronger than ABS?

Nylon is durable with less strength and stiffness than ABS. Nylon is more challenging and more chemically resistant than ABS.

However, its low strength stops it from being used in many different manufacturing fields.

6. Is PETG safe for breathing?

The fume is not toxic. However, it is always the best for ventilating your printing room.

When printed with PETG, there are carbon emissions from fumes.

7. What is the difference between PLA vs TPU?

If you need the easiest filament for printing, you should use the PLA, which is more friendly to the environment and compostable than others.

However, if you need to add some flexibility to your prints, you can use TPU.

It is easier to use, so it is a better choice for beginners, while TPU will be more flexible and perfect for those needing to return to its original state.

8. What is the best filament?

First, the beginners should pick PLA, while some experienced people will choose TUP which is more difficult and requires experience.

You can use it for prototypes as this material is cheap and easy to print.

While if you have a heatable bed, you need to increase durability, then ABS will not let you down.

Besides, when you do not have a heated print bed but still want to print the heat resistant and some stable object, don’t forget to choose PLA-Tec.

PETG will be ideal for print vases and semi-transparent.

Conclusion

With all five filaments, each will deliver the merits and demerits. What you need to do is pick the one being suitable for your experience and application.

Hopefully, Pla Vs Abs Vs Petg Vs Tpu Vs Nylon will bring you enough information to make you confident to make your decision.

Further Reading: 

Best Creality 3d Printer in 2021 – How To Choose The Best One?

Best Creality 3d Printer

Choosing your best Creality 3D printer is not too difficult as it was many years ago.

3D printers used to be hulking and costly devices that reserved for factories and well-heeled businesses just a decade ago.

Except for the small circles of professionals who designed and used them, they were mostly unknown.

However, these amazing devices have become popular and affordable items for use by designers, developers, hobbyists, and even curious users.

If you are finding your suitable 3D printer, it is important to understand how they vary so you can choose the right one.

They are available in a range of designs. You can use these printers for a specific audience or type of printing.

Are you getting ready to take the plunge?

Let’s take a look at our article.

The Top-Rated Creality 3d Printer (Recommendations)

#1. CREALITY ENDER 3– TOP PICK

#2. CREALITY ENDER 3 V2 – UPGRADED VERSION

#3. CREALITY CR-6 SE – PROFESSIONAL CHOICE

#4. CREALITY CR-10 MINI – LARGE PRINTING SIZE PICK

#5. CREALITY LD-002H RESIN 3D PRINTER – FULLY ENCLOSED AND RESIN PRINTER OPTION

#6. CREALITY CR-10 V3

#7. CREALITY ENDER 5 PRO 


Best Creality 3D Printer: What You Need To Know About 3D Printers?

1. Types of 3D Printers – Creality 3d Printer

Stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM) are the three most popular types of 3D printers for plastic pieces.

SLA and SLS are two advanced 3D printing technologies, putting these strong and affordable industrial fabrication tools in the hands of professionals all over the world.

– Stereolithography (SLA):

This technology was developed in the 1980s and is still one of the most common technologies among professionals, was the world’s first 3D printing method.

In a method known as photopolymerization, SLA 3D printers use a laser to cure liquid resin into hardened plastic.

Stereolithography Materials

Source: Formlabs.Com

SLA resin 3D printers have grown in popularity due to their ability to manufacture high accuracy, isotropic, and watertight prototypes and parts in a variety of advanced materials with fine features and a smooth surface finish in a variety of advanced materials.

The optical, mechanical, and thermal properties of SLA resin formulations are comparable to those of ordinary, engineering, and industrial thermoplastics.

SLA is a great application for:

  • Prototyping for features
  • Modeling concept
  • Short-run manufacturing
  • Applications in dental and jewelry

Sla Printed Gears

SLA printed objects has sharp edges, smooth finish, and less visible layer lines (Source: Formlabs.com)

– Selective laser sintering (SLS):

SLS sinters small particles of polymer powder into a rigid structure using a high-power laser.

The component is supported during printing by the unfused powder.

This removes the need for dedicated support structures.

SLS is suitable for complex geometries including interior elements undercuts, thin walls, and negative features.

SLS printed components have outstanding mechanical properties, with strength comparable to that of injection molded parts.

Selective Laser Sintering 3d Printer

Source: Formlabs.com

Nylon, a popular engineering thermoplastic with excellent mechanical properties, is the most common material for selective laser sintering.

Nylon is solid, lightweight, and versatile as well as resistant to impact, chemicals, heat, UV light, water, and dirt.

SLS is a good choice among engineers for functional prototyping and a cost-effective alternative to injection molding for limited run or bridge manufacturing due to its low cost per component high efficiency and established materials.

SLS is good for:

  • Prototyping for features
  • Customize, short run, bridge manufacturing
  • End use parts

Sls Printed

SLS printed objects has likely rough finish and nearly no visible layer lines (Source: Formlabs.com)

– Fused deposition modeling (FDM):

At the consumer level, FDM, also known as fused filament fabrication (FFF), is the most commonly by extruding thermoplastic filaments like ABS and PLA through a heated nozzle, melting the material, and layering it onto a building frame.

The machine will add each layer one by one until the part is finished. Best Creality 3D printer uses this method, we will mention about it below.

Fused Deposition Modeling 3d Printer

Source: Formlabs.com

FDM technology is ideal for simple proof-of-concept models. It is also fast and low cost prototyping of simple parts that would otherwise be machined.

However, as opposed to SLA or SLS, FDM has the lowest resolution and precision, making it unsuitable for printing complex designs or sections with intricate features.

Chemical and mechanical polishing processes can produce higher quality finishes.

Industrial FDM printers use soluble supports to address some of these issues and can print a wider variety of engineering thermoplastics, but they come at a high cost.

FDM printers are good for:

  • Basic concept models
  • Simple prototyping

Fdm Printed Sla Printer

FDM printed objects has lots of visible layer lines and some inaccuracies around complicated features (Source: Formlabs.com)

2. Types of materials for Creality 3d Printer

The materials that can be used for 3D printing have come a long way since then.

There is now a wide range of different content forms used in various states (powder, filament, pellets, granules, resin, etc.).

Specific materials, with material properties that are more specifically customized to the application, are now commonly designed for specific platforms conducting dedicated applications (an example would be the dental and jewelry sector).

However, there are now far too many products available from numerous manufacturers that you can use for your best Creality 3D printer to cover them all.

– Plastic:

A lot of hobbyists use nylon, also known as polyamide, in the sintering process as a powder.

Or in the FDM process, it is used as a filament. It comes in natural white color, but can be colored before or after printing.

This material can also be combined (in powder form) with powdered aluminum to create Alumide, a common sintering 3D printing material.

  • ABS is another popular material in filament form on entry-level FDM 3D printers.

It is an especially tough plastic that comes in a number of colors.

Furthermore, you can purchase ABS in filament form from a variety of non-proprietary sources.

  • PLA is a biodegradable plastic that has gained popularity recently.

It is available in resin form for SL processes and in filament for FDM.

It comes in a range of colors, including translucent, which has proven to be a useful choice for some 3D printing applications.

However, it is not so long-lasting.

– Metals:

Metal and metal composites are rapidly being used in industrial 3d printing.

Aluminum and cobalt derivatives are two of the most common.

Stainless steel in powder form for the sintering, melting, or EBM technologies is one of the strongest and hence most widely used metals.

It is naturally silver but can be plated with gold or bronze to give it a different appearance.

  • Gold and silver have recently been added to the list of metal products that can be 3D printed directly, with clear applications in the jewelry industry.

All of these contents are highly solid and are processed as powder.

  • Titanium is one of the strongest metals available, and it has long been used in 3D printing industrial applications. It is available in powder form.

– Ceramics:

Ceramics are a relatively new class of materials that can be used to print 3D objects with varying degrees.

It is worth noting that, after printing, the ceramic parts must go through the same processes as any other ceramic component produced with conventional methods of production, namely firing and glazing.

– Paper:

The proprietary SDL process supplied uses standard A4 copier paper as a material.

It follows a distinct business model from other 3D printing vendors, in which the machine’s initial outlay is in the mid-range, but the emphasis is on a simply obtainable.

This is a cost-effective material supply that you can buy locally.

Paper-based 3D printed models are safe, environmentally friendly, and easily recyclable, and they do not require any post-processing.

– Biomaterials:

The potential of 3D printing biomaterials for a variety of medical and other applications is the subject of extensive research.

At a number of leading institutions, living tissue is being researched with the aim of improving applications, such as printing human organs for transplant and external tissues for replacement body parts.

Other research in this field is based on the production of food products, with meat being the most prominent example.

– Food:

Of course, this not a widely used material.

Extruder experiments for 3D printing food substances have exploded in professionals over the last few years.

The most famous is chocolate.

There are also printers that deal with sugar, as well as some pasta and meat experiments.

In the future, we can hope to see whether 3D printing technology can be used to create finely balanced whole meals.

Best Creality 3d Printer Shortlist

Product imagesProduct namesEditor's ratingPrice
CREALITY ENDER 34.4Check
Price
CREALITY ENDER 3 V24.5Check
Price
CREALITY CR-6 SE3.8Check
Price
CREALITY CR-10 MINI4.3Check
Price
CREALITY LD-002H RESIN 3D PRINTER4.2Check
Price
CREALITY CR-10 V34.4Check
Price
CREALITY ENDER 5 PRO4.4Check
Price

*Ratings are from Amazon at the time of publication and can change

The Best Creality 3d Printer

New Creality 3d Printer

#1. CREALITY ENDER 3– TOP PICK

See Latest Price

Key features:

  • Upgraded C magnet build surface plate
  • UL certified power supply
  • Extra tempered glass plate
  • Metal extruder
  • Printing stability

At the price range of about $250, Creality Ender 3 is our top recommendation as to the best Creality 3D printer so far.

Although there are plenty of products to look at, such as Voxelab Aquila or Elegoo Neptune 2, we are still sticking with the Ender 3 until now because it is the most budget-friendly and versatile option.

It has a heated print bed, allowing it to print a wider variety of materials. It helps in the adhesion of molten plastic to the bed, prevents larger prints from warping, and facilitates the removal of finished pieces.

However, we suggest using PLA and PETG as printing materials.

Since without adjudication, Ender 3 can not deal with higher temperature tough materials like nylon.

Pros:

  • Affordable
  • Enormous community
  • Decent printing quality
  • Compact design and easy assembly

Cons:

  • Lack of auto-leveling bed
  • Hard to print high temperature required materials
  • Require manual calibration

How to use Creality Ender 3? Here you are: 

#2. CREALITY ENDER 3 V2 – UPGRADED VERSION

See Latest Price

Key features:

  • Easy to use
  • Printing stability
  • Carborundum glass platform
  • Silent printing
  • Smart resume printing

In fact, Creality Ender 3 V2 is not so much a complete difference from the previous version – Ender 3.

It takes the basic design that serves the original so well and also introduces useful features that make it more workhorse-like and comfortable to use.

The construct volume is 220  x 220 x 250 mm, the same as the Ender 3 before it. Similarly, the Bowden style extruder and the ability to print various consumer filaments like PLA, PETG, and TPU (with care), are still available.

Belt tensioners, modified electronics, including a 32-bit board and print silencing TCM2208 stepper motor drivers, an integrated tool storage drawer, and some other upgrades are all news for the V2 version.

Pros:

  • The Carborundum glass platform enables the hotbed to heat up quicker and prints to adhere better.
  • 2 new printing modes: Silent and smart resume
  • High-quality prints
  • Worth the price

Cons:

  • Bed wheels are too tight that can be damaged
  • Can not replace parts as needed
  • Motherboard technical issues

All you need to know about the Creality Ender 3 V2: 

#3. CREALITY CR-6 SE – PROFESSIONAL CHOICE

See Latest Price

Key features:

  • Easy to use
  • Quiet operation
  • Pro performance
  • High-quality life addons

Instead of offering exclusive and unique features, Creality prefers to go above and beyond the “Pro” updates of all their products.

This CR-6 SE is an example. Until now, for beginners, CR-6 SE is one of the most advanced printers with boasting patented auto bed leveling and a wealth of tiny details that added up.

If you are thinking of getting an Ender 3 V2 and have some extra cash, CR-6 SE is essentially the deluxe version of that best Creality 3D printer.

Pros:

  • Auto bed leveling system
  • Easy to setup
  • Full-color touchscreen
  • Cold and quiet operating

Cons:

  • Expensive for home users
  • The execution is flawed
  • Reported to have switch issues

How does the CR-6 SE compare to the Ender 3? Watch this video to find your answer: 

#4. CREALITY CR-10 MINI – LARGE PRINTING SIZE PICK

See Latest Price

Key features:

  • Large printing size
  • Resume print feature

There is one key reason why you should choose the Creality CR-10 Mini over the Ender 3 Pro.

The build area is wider, measuring 300 x 220m. While the CR-10 Mini lacks the same level of community support as its older version, the CR-10, still has a thriving group of users.

However, if you do not need the additional build area, we suggest the Ender 3 is enough.

It is a newer and more capable computer in general.

One thing to keep in mind is that the CR-10 line has a tendency to go in and out of stock on eCommerce websites.

Pros:

  • Genergous build volume
  • External control board
  • Improved build quality

Cons:

  • Do not last long
  • Instruction is not complete enough for beginners
  • Sometimes the extruder randomly heated up to a temperature hot enough to cause smoke and burnt plastic odor.

Nexi Tech reviewed the Creality CR-10 Mini from unboxing to test printing. Check it out here: 

#5. CREALITY LD-002H RESIN 3D PRINTER – FULLY ENCLOSED AND RESIN PRINTER OPTION

See Latest Price

Key features:

  • Fast printing and longer lifespan
  • Ultra accuracy printing
  • Air filtration system with activated carbon
  • CHITUBOX Slicing software
  • Easy to assembly and level the platform

The Creality LD-002H is the best Creality 3D printer that costs under $250, which is significantly less than equivalent competitors like the Elegoo Mars 2 Pro.

It stands out from the competition thanks to the addition of an activated carbon filter and the use of Chitubox firmware.

For the LD-002H, the Wi-Fi connectivity would have been good, but the users are most disappointed by the lack of certain vat comfort features, such as protruding bumps or a pouring aid.

This machine, on the other hand, is on par with some of the top dogs in this range.

Creality also provided some updates in this machine compared to its predecessor, such as a significant increase in print volume as well as the monochrome LCD screen, which has become very necessary.

Pros:

  • Affordable resin printer
  • Air filtration
  • Good surface finish

Cons:

  • Loud noise release
  • Cured resin residue left on vat after every print
  • Hard to level
  • Not for beginners

Creality LD-002H Unbox and Setup:

#6. CREALITY CR-10 V3

See Latest Price

Key features:

  • Titan direct drive
  • Dual part cooling fans extruder 
  • Silent motherboard
  • All metal frame and triangle stable structure

The CR series has been popular with Creality users.

Frankly speaking, the only real difference from the CR-10 V2 to CR-10 V3 is the upgrade from a Bowden to a Titan direct drive extruder, which necessitates slight improvements to the spool holder and filament runout sensor.

How is it different?

Loading filament with a direct drive extruder is usually simpler than with a Bowden one.

Reduced stringing and oozing can also result in improved output when retracting filament.

One drawback of the V3 version is the control unit’s umbilical connection and the tangle of cables that come with it.

It is basically a right of passage to get the pause inducing discomfort of correctly long these tendrils to prevent snagging on the moving axes.

Pros:

  • Good wiring management
  • Solid and strong structure
  • Easy to operate

Cons:

  • Some users face problems with the control box
  • Stop printing randomly
  • Metal hot end clogs easily
  • Cooling system problems
  • Belt gouges cause strange banding issues

Official Creality CR-10 V3 How to Assembly and Operate?: 

#7. CREALITY ENDER 5 PRO 

See Latest Price

Key features:

  • Upgraded Bowden PTFE tubing
  • Metal extrusion frame
  • Removable platform
  • Double Y-axis with stable output
  • High standard V groove profile

The Creality  Ender 5 Pro comes with a brand new Bowden PTFE tubing, an improved Y-axis motor, a metal extruder, and few other minor upgrades over the Ender 5.

To speak more clearly, it is the best Creality 3D printer that provides incredible value for your money with just under $500.

It has a magnetic self adhesive build base, a new metal extruding unit, and a modular design that requires minimal assembly.

The improved Creality 3D printer filament tubing has an internal diameter of 1.9 mm to 0.5 mm, which eliminates any excessive space and prevents filaments from bending and warping.

This amazing feature allows you to print versatile filaments such as TPU, TPE, and other thermoplastic materials.

Pros:

  • Easy assembly
  • Silent processing
  • Durable extruded frame
  • Convenient filament tubing
  • Power recovery

Cons:

  • Require consistent re-leveling
  • Do not have a filament runout sensor
  • Hard to clean the magnetic bed

A quick review and first test printing on Creality Ender 5 Pro by GeekSmart: 

Best Creality 3D Printer: What To Consider Before Choosing?

Which 3d Printer Is Best For Beginners

1. Your Purpose

This is a basic but also a fundamental question: Why do you want to print in 3D?

The right 3D printer for you is the one that can answer the question of how you want to use it.

Consumers and schools would want a model that is simple to set up and use, requires little maintenance, and prints fairly well.

Special features, such as the ability to print items in several colors or with multiple filament kinds, may be desired by hobbyists and artists.

Designers and other users will search for high-quality ones.

Short-run printing people may need a wide build area in order to print many items at once. Individuals or companies who want to show off the wonders of 3D printing to friends or clients will want a machine that is both attractive and reliable.

Model 3d Printer

Source: EdTech Magazine

2. The Size Of The Objects You Want To Print

Make sure that the build area of the printer is wide enough to accommodate the items you want to print.

The build area is the three-dimensional size of the largest object that can be printed with a given printer (at least in theory, it may be a little smaller if the build platform is not perfectly flat, for example).

The average build area of a 3D printer is 6 to 9 inches square, but it can vary from a few inches to more than 2 feet on a side, and a few are square.

3d Printer Models Free

Knowing the size you are going to print is important (Source: Sculpteo)

3. What Kinds Of Materials Do You Have?

Most low-cost 3D printers use the FFF method, in which spools of plastic filament are melted and extruded, then solidify to form the item.

Acrylonitrile butadiene styrene (ABS) and Polylactic acid (PLA) are the two most popular filament types.

Each has its own set of characteristics.

ABS, for example, melts at a higher temperature and is more stable than PLA, but it emits gases that many people find irritating when melted, and it requires a heated print bed.

PLA prints appear smooth, but they are fragile as well.

High impact polystyrene (HIPS), wood, bronze, and copper composite filaments, UV luminescent filaments, nylon, Tritan polyester, polyvinyl alcohol (PVA), polyethylene terephthalate (PETT), polycarbonate, conductive PLA and ABS, plasticized copolyimide thermoplastic elastomer (PCTPE), and PC ABS are among the other products used in FFF printing.

The best Creality 3D printer can easily deal with these kinds. Since each material has a different melting point, these exotic filaments can only be used in printers that are equipped for them or have software that allows users to monitor the extruder temperature.

Last but not least, most models use the smaller diameter filament, which comes in two diameters: 1.85mm and 3mm.

The filament is offered in 1kg spools, with prices vary for different materials.

Although many 3D printers supper generic spools or cartridges, some use proprietary ones.

These frequently include an RFID chip that allows a printer to recognize the filament form and properties, but this only works with printers from that manufacturer.

Make sure the filament is the correct diameter for your printer, as well as the spool size.

Most Common 3d Printing Materials

3D printing common materials (Source: 3DPrint.com)

4. The Required Resolution

A printer uses instructions coded in the file for the object to print and extrude successive thin layers of molten plastic.

Layer height equals resolution in 3D printing. Microns are used to quantify resolution, with one micron equaling 0.001 mm.

The smaller the number, the higher the resolution. Since the thinner each layer is, the more layers require to print any given object.

Also, the finer the detail that can be captured, the more layers are required to print it.

However, increasing the resolution is similar to increasing the megapixel count on a digital camera: A higher resolution can help, but it is not always a guarantee of good print quality.

Is Creality a Good 3d Printer

Almost all products on the market today can print at a resolution of 200 microns or greater, and many can print at 100 microns, which produces generally good quality prints.

Some printers can still print at higher resolutions, up to 20 microns, but you will need to go beyond the default resolutions and into custom settings to get it finer than 100 microns.

However, higher resolution comes at a cost. Thus, the best Creality 3D printers with greater than 100 microns typically cost more.

Another drawback of rising the resolution is that it will lengthen the time it takes to print.

By having the resolution, the time it takes to print a given item is approximately doubled.

The extra time can be worth it for professionals who expect the highest quality in the items they print.

3d Printer Resolution Guide

3D printer resolution effects strength (Source: To Buy A 3D Printer)

5. Multiple Colors Printing

Objects can be printed in two or more colors on certain machines with multiple extruders.

The majority are dual extruder versions, with each one feeding a different filament color.

One limitation is that they can only print multicolored objects from files that have been explicitly developed for multicolor printing, with a separate file for each color, so that the areas of different colors fit together like three-dimensional jigsaw puzzle pieces.

Multi Color Filament

Multicolor filament (Source: 3D Printer Universe)

6. The Build On Surface

The importance of the surface on which you will print may not be obvious, but it is crucial in practice.

A good platform can allow the object to stick to it while printing, but it should be easy to remove once completing printing.

A heated glass platform covered with blue painter’s tape or a similar surface is the most common configuration.

Objects bind to the tape fairly well and once finished, they are easy to remove.

Curling upward of the bottom corners of items can be prevented by heating the platforms, which is a common problem when printing with ABS.

A sheet of perforated board with tiny holes that fill with hot plastic during printing is used by a few 3D printers.

The problem with this approach is that, although it can keep an item firmly in place during printing, it may be difficult to remove afterward.

To free the item and clean the surface, use a thumbtack or an awl to force the plugs of hardened plastic out of the perforations.

This is a time-consuming operation that can also harm the board.

Furthermore, it is also crucial to start a print task with the extruder at the proper height above the build platform.

You can calibrate the Z-axis calibration by lowering the extruder until it is near enough to the build platform that a sheet of paper put between them will travel horizontally with minimal resistance.

Normally, you have to calibrate the axes manually, but best Creality 3D printer can do it automatically.

Creality Ender 3 Magnetic Build Plate

Creality Ender 3 build on plate (Source: All 3DP)

7. Do You Really Need A Closed Frame?

Closed frame 3D printers have a door, walls, and a lid or hood that are all enclosed.

Opened frame models allow for quick access to the print bed and extruder, as well as visibility of ongoing print jobs.

A closed frame one is somehow better because it prevents external factors like children, pets, and even careless adults from touching the hot extruder.

It also means quieter operation, with less fan noise and odor, especially when printing with ABS, which can emit a burnt plastic odor.

Creality 3d Printer Enclosure

Creality 3D printer enclosure (Source: All 3DP)

8. Connection Ports And Software

Most printers work with a USB connection.

Some have built-in memory, which allows them to retain a print task in memory and continue printing even if the USB cable is disconnected or the device is turned off. Just a few have wireless access, either Wi Fi or a direct peer to peer connection.

Wireless has the disadvantage of taking longer to upload the printing files, which can be up to 10MB in size.

Another linking option is ethernet, which allows you to share a printer over a local network.

Besides, some now use SD (or microSD) card slots.

You can upload and print object files using the printer’s controls and monitor.

A suite of software is included with most of today’s 3D printers, either on a disk or as a download.

It is compatible with Windows, macOS, and Linux as well.

A printing program that manages the motion of the extruder, a healing program to refine the file to be printed, a slicer to prepare the layers to be printed at the correct resolution.

Creality Cr-10 Usb Driver

Creality CR-10S USB port (Source: Thingiverse)

Frequently Asked Questions About Choosing The Best Creality 3D Printer

1. How Much Does A Home 3D Printer Cost?

A lot of entry-level and hobbyist 3D printers cost between $200 and $500, with some going for as expensive as up to $2000.

High-end 3D printers, such as professional ones, range in price from $1500 to $6000, depending on the capabilities of the printer.

2. How Long Does It Take For 3D Printing?

Which Software Is Best For 3d Printing

The time it takes to 3D print a part is determined by a number of factors.

The size, height, complexity, and printing technology used are all factors to consider.

This can take from 30 minutes to several days. The larger the part and the more complicated it is to print, the longer it takes.

3. How To Fix The Nozzle Not Discharging?

According to Creality, you have to try 3 steps:

a. If the loading filaments are not in order, reinstall them.

b. If the nozzle is too close to the bedding, relevel it.

c. If there is clogging in the plug, clean the throat.

What Is The Best Creality Printer

4. How To Fix When The Machine Is Printing Without Any Filaments?

Check to see if the motor’s extrusion gear is loose. If yes, try to tighten the top screw.

Check if there is any knotting or clogging in the filaments. If yes, straighten them out.

If there is clogging in the plug, clean the throat.

5. What To Do When Hotbed Heating Not Working?

Best Creality Printer

Without using the heating command, check to see if the temperature shown on the monitor is normal room temperature.

If not, it is most likely a thermal issue, simply replace it with a new one.

Besides, check to see if the output voltage of the main board’s hotbed port is 24V when heated.

If there is no voltage, the problem is with the main board, which needs to be replaced.

Otherwise, it is most definitely a problem with the hotbed board, which should also be replaced.

Conclusion

Before deciding, we suggest you to make some basic considerations. Decide whether you want to make, miniatures or tiny models first. If that is the case, you will need a resin printer, or a filament one. Then, think about the size of the pieces. If you need very large prints, your options will quickly become limited. Finally, how much money do you have?

After all, which 3D printer is the best for beginners? The CREALITY ENDER 3 is still our top pick amongst other products since it has widely used by a lot of people and received good feedback for years. The ENDER 5 PRO  is a more professional choice, for users who want to experience the new type of PTFE tubing. It also works silently, which is great in our opinion.

Choose wisely your best Creality 3D printer. We would not recommend going with the cheapest option because, in fact, those are the printers that generate the poorest quality results and cause the most frustrations. Choose what is suitable for your purpose is the key.

Further Reading: