Best Hairspray For 3d Printing in 2022 (TOP 10) | A Complete Guide

It may sound weird if someone is looking for the best hairspray for 3D printing. However, when the material breaks from the bed, it is one of the quickest ways for a print to fail. You can buy expensive sticky sprays, but you can also use cheap hairspray to improve adhesion.

In this article, we introduced to you the top products that you can pick based on personal needs.

Moreover, you can also find tips to deal with bed adhesion and get the perfect print ever!

Let’s take a look!

The Top-Rated Hairspray For 3d Printing (Recommendations)

1 – L’OREAL PARIS ADVANCED HAIRSTYLE – TOP PICK

2 – PAUL MITCHELL FINISHING SPRAY – STRONGHOLD

3 – AQUA NET EXTRA SUPER HOLD HAIR SPRAY UNSCENTED 

4 – R+CO OUTERSPACE FLEXIBLE

5 – SUAVE EXTREME HOLD UNSCENTED 

6 – GARNIER FRUCTIS TYLE EXTREME CONTROL

7 – AUSSIE INSTANT FREEZE


Why We Can Use Hair Products In Technical Work?

The idea of getting the first layer right is one of the most typical challenges with 3D printing. Only when this is done correctly can the 3D printed model attach properly to the print surface. Hairspray has great bonding and holding qualities, which may explain why it is said to be ideal for holding things in place. Moreover, it is cheap and you can easily buy it from malls or also online. 

It does, however, need some preparation, without which it may ruin the whole bed. Choose a product carefully that will keep the printing and the bed together. Before using it, try to spray it many times to check its excellent binding. 

Why Does My Object Not Stick To The Bed?

The first layer of your print must tightly adhere to the printer’s build platform in order for the rest of your item to be created on top of it.

If the first layer does not stick to the build platform, problems will arise later. Below are some common reasons:

  • Not using adhesion support
  • Using an incorrect print bed surface
  • Bad first layers or a poorly leveled bed
  • Temperature differences are not being taken advantage of.
  • Using neither a raft nor a brim

hairspray for 3d printing

A failed first layer (Source: Reddit)

But do not worry, get yourself the best hairspray for 3D printing and everything will be fixed easily. It helps:

1. Make the first layer to stick:

One of the issues is getting the first layer and then keeping your impressed model on the printed plate.

This is extremely hard for ABS and a big issue for Nylon filaments because Nylon fleece is easy to warping. This is why we need to use hairspray.

The issue is that the model shrinks when the material refreshes and the soft corners curl up.

The degree to which it distinguishes has an impact on the use of 3D printers. Furthermore, because the model does not attach to the model sheet when the nozzle head moves, a big nest will result.

2. Avoid warping:

The plastic often shrinks as it begins to cool. It will curl at the corners as a result, and the model will eventually warp.

The material is not sticking to the surface as well as it should be. This problem is usually avoided by using a good hairspray for quality printing.

3. Strong bonding and best hold:

Thanks to the excellent holding ability, we can use it as a replacement for glue sticks with a lower cost and easy application.

Many tests have proved that hairspray helps things to stick evenly and strongly to their plate. 

How To Use Hairspray For 3D Printing?

Not every type of hairspray can be used as adhesion support. To know which one you should choose, take a look at its ingredients.

If you can find copolymer constituents such as PVA, vinyl, or acetate, that is the product you need. 

It is very simple to use. First, we need to prepare some things:

  • Hairspray
  • Issue or soft cloth 
  • Working table 

Then, follow the steps below: 

Step 1:

Find your best hairspray for 3D printing.

Step 2:

Make the bed hot. Hairspray adheres best to a hotbed. It will work on a cool bed, but for best results, set the temperature to around 50 degrees Celsius.

However, hairspray is a flammable material. Although most printer operating temperatures are much below the ignition point, do not move the printer when spraying because sparks could start a fire. 

Keep in mind that some products are made of acetone, which is flammable as well. It is still a good idea to be careful.

using hairspray for 3d printing

Temperature setting example (Source: Instructables)

Step 3:

Spray on the bed. It is better with a thick layer.

hairspray for 3d printer bed

(Source: Instructables)

Step 4:

Let it rest for about 30 seconds to 1 minute. After that, wipe it off with a tissue or soft cloth. Try to lay the towel flat and absorb the spray instead of wiping it away actually.

how to use hairspray for 3d printing

( Source: Instructables )

Step 5:

Check the bed. It should have a sticky feel to it. If not, go through the process again.

Try putting up different small parts of the bed.

Prints will stay in the bed lot better now, and they will have a much lower possibility of peeling off, so you will not need to use a raft. Every 2 to 8 prints, you will most likely need to reapply.

Glue stick And Hairspray, Which One Is Better?

Both glue sticks and hairspray can effectively attach 3D prints to the print bed, but some people are unsure which is best. Hairspray, according to many people who have tried both, has a better overall success rate, especially with surfaces like glass and ABS filament.

Glue sticks can stick to glass surfaces a little too well for PLA, especially if it is a larger work.

Others say that using glue to minimize warping issues gave them the best results, allowing them to move from using rafts and brims to just skirts.

When compared to glue, hairspray is quite easy to clean. A simple wash with hot water should remove its layer and will not cling together like glue.

Some people also say that this type is messy, too liquid, and hard to remove. However, this depends on the type of hairspray you buy, as not all brands are the same.

One user who uses hair gel says to put it on before a 3D print and only wash it off after about 10 prints, implying that using the right product and following the necessary steps can make life much easier.

When comparing the experiences of others with glue sticks and hairspray, the overall opinion seems to be that hairspray is cleaner, easier to clean and re-apply, and lasts longer between coats.

Glue can be a harder thing to deal with. And it does not look well on the glass as well.

Best Hairspray For 3D Printing Shortlist

Product imagesProduct namesEditor's ratingPrice
L’OREAL PARIS ADVANCED HAIRSTYLE4.5Check
Price
PAUL MITCHELL FINISHING SPRAY4.6Check
Price
AQUA NET EXTRA SUPER HOLD HAIR SPRAY UNSCENTED 4.8Check
Price
R+CO OUTERSPACE FLEXIBLE4.7Check
Price
SUAVE EXTREME HOLD UNSCENTED 4.7Check
Price
GARNIER FRUCTIS TYLE EXTREME CONTROL4.6Check
Price
AUSSIE INSTANT FREEZE4.7Check
Price

*Ratings are from Amazon at the time of publication and can change

Best Hairspray For 3D Printing: Which One To Choose?

1 – L’OREAL PARIS ADVANCED HAIRSTYLE – TOP PICK

See Latest Price

Pros: 

  • The anti-frizz ensures a super-strong bonding
  • Water-free and humidity resistant

Cons:

  • Defective spray nozzle design makes it clogged and dripping in all directions
  • Have a bad smell

2 – PAUL MITCHELL FINISHING SPRAY – STRONGHOLD

See Latest Price

Pros:

  • Famous brand 
  • Cover all the print area
  • Easy to remove from the bed
  • Apple scent

Cons:

  • The bottle size is too small for the price 
  • The spray head gets clogged after a few use

3 – AQUA NET EXTRA SUPER HOLD HAIR SPRAY UNSCENTED 

See Latest Price

Pros:

  • Firmly bonding on glass and many difficult surfaces
  • Withstand high temperatures
  • Great for PLA materials 

Cons:

  • Kind of expensive

Using Aqua Net Tutorial: (105) How to use hairspray on 3d printer

4 – R+CO OUTERSPACE FLEXIBLE

See Latest Price

Pros:

  • Beautiful appearance 
  • Affordable 

Cons:

  • Do not have a very strong bonding 
  • The spray head gets clogged after a few use

5 – SUAVE EXTREME HOLD UNSCENTED 

See Latest Price

Pros:

  • Unscented

Cons:

  • Hard to remove the object from the bed 
  • The spray head gets clogged after a few use

Using Suave Tutorial: (105) How to use Hairspray for 3d Printing

6 – GARNIER FRUCTIS TYLE EXTREME CONTROL

See Latest Price

Pros:

  • Very cheap
  • Hold greatly

Cons:

  • Spray head clogs and breaks easily

7 – AUSSIE INSTANT FREEZE

See Latest Price

Pros:

  • Firm hold
  • Platinum shine

Cons:

  • Bad spray head design
  • Quality degrades after a short time.

How To Prevent Bad Adhesion?

what hairspray for 3d printing

During the 3D printing job, you will face problems such as shrinking, warping, and adhesion. When working with nylon, ABS, resins, and other materials, these issues become even more visible. As the plastic cools, it is likely to shrink. This causes the print to curl up in the corners, and the sculpture may eventually warp as a result. 

There are also cases where the print material does not stick to the surface. Although we have other easy to harder ways and settings that can improve bed adhesion, the following are the most useful. If you do the following, you can improve it:

  • Clean dirt and residues from the build plate
  • Level the build plate properly
  • Change and adjust the cooling fan speed
  • Nozzle and printing temperature calibration
  • Make use of 3D Printer rafts and brims
  • Bed adhesives are used to configure and calibrate the first layer settings.

For quality printing, it is normal to see the use of the best hairspray for 3D printing to avoid this problem. It helps in the proper adhesion of 3D printers. With so many options available, finding the perfect hairspray for this purpose is hard.

Hairsprays can also help in the finishing and coating of your final result. They can support the bonding of printed materials to hotbeds, while they may also work on cold beds. At a temperature of around 50 ℃, they are known to work best.

How To Fix The Sticking Issue?

what kind of hairspray for 3d printing

We have 6 easy solutions for you:

1 – Level the bed 

First of all, if your printer has an adjustable bed and you are having sticking problems, check sure its base is leveled. 

An uneven bed could mean that one side is closer to the nozzle than the other, making printing tricky. Additionally, uneven bed surfaces can cause your thing to warp or break.

The method for leveling your bed varies depending on the printer. Some modern ones, for example, are designed with automated bed leveling, but you can also manually adjust your bed. If your machine does not have an automatic feature, you will have to do it by yourself. 

2 – Check the distance between the bed and print head

Between the bed and the nozzle, there is a sweet spot. It is the perfect distance between close and far.

Check the gap between the bedplate and the nozzle if your 3D print is not sticking to the bed.

The filament will not be able to come out if the nozzle is too close to the bed, and the extruder may damage or drag the previously produced layer. However, if the nozzle is too far away from the bed, the filament will not correctly place on the bed and will not attach.

To find out what works best for the filament you are printing, you will have to experiment.

The nozzle should be close enough to the bed so the filament is slightly pressed onto the surface. This gives the filament a bit of traction on the surface.

3 – Check the nozzle speed

Nozzle speed can also affect whether or not your 3D print sticks to the bed. Similar to nozzle distance, nozzle speed must be found in a sweet spot, especially when printing the first few layers.

Slowing down the nozzle’s speed allows the plastic to bond to the bed more fully and get a firmer hold. The filament may not stay on the bed if you print too quickly because the plastic cools down too soon. After you have laid down your first few layers and are happy with the adhesion of your print to the bed, you can set the nozzle to its normal speed.

4 – Check the bed temperature

The temperature of your plate is the last thing to consider. If you are printing with a heated one, double-check that you are using the right temperature for your filament. Different materials for 3D printing need different plate temperatures.

It may also be helpful to raise the temperature by a few degrees to help in the adhesion of the first layer. You can lower the temperature to maintain a normal heat once the print has built a tight hold.

5 – Use adhesion support

If you have checked all of your bed and nozzle settings and still have issues with bed adhesion, it is time to bring in some backup plans. If your 3D print still does not attach to the bed, apply an adhesive straight to the bed where the filament will land.

You have a few different options to choose from, including:

  • Glue sticks
  • Painter’s tape
  • Best hairspray for 3D printing 
  • 3D printing-specific adhesives such as Magigoo 

Moreover, using bonding support can also help you to correctly remove the glue from your object after it is finished. This typical method is cheap and quick, and it can save you a lot of time and effort. Only a small layer needs to apply to the bed. Different filaments stick to different adhesives, so try out a few different combinations to see what works best for you.

6 – Use brims and rafts

If you do not want to use adhesives but your item still does not attach to the bottom, a brim or raft may be the best solution.

A brim is a layer of filament that surrounds the print and connects to the object’s first layer. It is like the brim of a hat. It does not sit beneath the part, but rather adds a layer of protection around it.
A raft, on the other hand, is a thin layer of filament that is placed on top of the rest of your print before it begins. This produces a flat filament base on which the rest of your print will be made. Once the printing is completed, the rafts and brims are removed from the final product.

These are super useful when making very small prints or prints that need more support in the first few layers. Both, for example, will help in the anchoring and adhesion of the print.

Best Hairspray For 3D Printing: Frequently Asked Questions

can you use 3d printer filament in a 3d pen

1 – What Can I Do If My PLA Does Not Stick To The Heated Bed?

You must follow a few tested steps that may assist you in fixing the issue.

To begin, clean the printing bed as well as the nozzle of the printing ingredients.

Make sure your 3D printer bed is level and free of any rough edges. Reduce the print speed for the first layer if possible. Only raise the bed temperature for the first layer this time.

2 – How To Get My Object To Stick To The Bed?

If your thing is not sticking to the bed properly, there could be a number of causes.

Many 3D printer filaments need a heated print bed for good adhesion.

Without one, proper bonding may be hard. As a result, this must be effectively addressed. You should also make sure that the 3D printed material does not cool too quickly or unevenly.

This could also cause the part to retract.

3 – What Are The Differences Between Hairspray And Glue Stick?

Both two types have their own advantages and disadvantages, and they may or may not work in a similar way.

They help to keep the 3D printing firmly in place by strengthening the bed.

In general, we recommend starting with a glue stick.

If that doesn’t work, we recommend using a stronger product, such as hairspray. In comparison to glue sticks, hairspray is very simple to use.

4 – What Do You Spray On Your Objects?

Because it quickly covers a surface with an even coating, spray primer is the best way to paint your printed parts.

Although brush ones are available, they are more difficult to work with and are best used for fine touch-ups.

Choose a plastic-compatible type and paint from the same brand for the best results.

5 – When Can I Remove My Print From Bed?

If you can cool the print to below room temperature, it will contract more and lift itself off the print bed.

Placing your entire work, including the bed, inside a fridge is the easiest way to do this. It should be much easier to remove after an hour or two if you leave it there.

Conclusion

Previously, we believed that “extra hold,” “firm hold,” and larger numbers were the keys to a good hairspray for 3D printing adhesion, but after testing some low-cost, own-brand hairspray, we have changed our minds. This one outperformed the others. We still have not got the same results as with the glue stick, but it is a lot easier to use. It also appears that cheap ones are still good.

In summary, we suggest you pick L’OREAL PARIS ADVANCED HAIRSTYLE if this is the first time you use hairspray to fix bed sticking. This product is safe and easy to work with, even when you do not have many professional experiences. Besides, GARNIER FRUCTIS TYLE EXTREME CONTROL is also a good choice. Garnier ones are cheap, too.

In fact, there is no certain best hairspray for 3D printing. The best should be the one that meets all your needs and requirements. We hope after reading our article, you now know which one to choose.

Further Reading:

5/5 - (1 vote)